If you have already cut the neck to your liking, or are satisfied with the one that you cut out initially, you should think about how to process it.
In this sewing video tutorial
You will see one of the ways to process the neck with a piping.
If you are not yet
decided on the shape of the neckline, you should watch the video sewing tutorial on how to cut the neckline (see at the end of the article at the link)
In addition to facing, you will also need a bias trim, made in the same way as for edging sections without fixtures.
But, of course, the inlay in this case should be narrower.
Как make such a badge you can read this article
or see video master class
Ready dress pattern for video
We make facingare cut in the usual way: doubler is cut along the product, which is glued to the rest of the fabric with allowances for grinding parts of the facing, the parts of the facing are grinded, the seams are ironed, and the detachable cut is overcast.
The prepared inlay should be sewn to the cut of the neckline, laying it on the front side of the bodice.
Then, lay the neckline of the piping face to face, aligning the seams of the piping with the middle seam of the back and the half-skid of the dress.
It is advisable to chop off the cuts with pins.
The neck turning line is laid from the wrong side and is laid exactly along the oblique inlay sewing line.
This operation should be taken very carefully.
After that, the facing is turned inside out, the allowances are cut and turned away towards the facing. A line is laid along the facing, fixing the allowances.
At the end, the neck is ironed, the retractable edge of the facing is tucked in and a finishing line is laid.
Watch another video tutorial on cutting and sewing techniques about the processing of the neck turning.
Sew Tatyanka's dress according to the pattern
Trapeze dress patterns and how to sew them
|