Patterns of women's palazzo trousers with a detachable detail

Instructions for patterns of women's palazzo trousers with a detachable detail

Large and small sizes.

Cutting and sewing at home

Contents of the instruction:

1. Description of patterns for women's palazzo trousers with a detachable detail.
2. What patterns are included in the pattern kit.
3. Description of the design of the style and what to sew from.
4. How to cut palazzo pants in large and small sizes.
5. How to sew women's trousers at home.

Buy and download this pattern

Pattern Description

Patterns of women's palazzo trousers with a detachable detail

Sizes: 40–52 and 52–64.

File format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files Patterns of women's palazzo trousers with a loose detail from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Difficulty level is medium - skills in cutting and sewing classic trousers with pockets and a belt.

The style is suitable for all most figures of varying stature.

Pattern is for home use only.

Complete set of patterns for women's palazzo trousers with a detachable detail

(picture 1)

1. Pattern ZP (Back half of trousers).
2. PP patterns (Front half of trousers).
3. Pattern of the flight part.
4. Burlap patterns for processing a cut-off barrel pocket - Burlap-valance and Burlap facing.

Belt patterns are not included in the kit, since the belt is a rectangular strip of fabric. How to cut a belt is described below.

Description of the design of a pattern of loose women's trousers in the "palazzo" style with a detachable detail and the fabric for sewing such trousers

A simple-looking style with an intricate waistband detailing.

What to sew loose trousers with a detachable detail from

You will need thin but dense suit fabric. Of course, you can use thin dense silk, thin linen and thin denim.

Consumption will be from 220 to 250 cm with a width of 150 cm.

Instructions on how to buy, how to print yourself and others

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a pattern ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

How to cut palazzo pants in large and small sizes.

Before cutting, you should adjust the length of the trousers by placing a fold at the knee area or cutting and spreading the pattern in the same place.

If an adjustment is made, then the length and side seam of the flying part should also be adjusted.

In fact, cutting is no different from cutting other trousers - the lobe coincides with the ironing line; allowances - 1 cm on the sides and steps, bottom - 2,5–4 cm (depending on processing), do not add at the waist, 0,7–1 cm at the entrance to the pocket.

Along the bow there is an allowance for the zipper fastener and along the seat there is an allowance with a margin, expanding to 3-4 cm, which will allow you to perform a high-quality fitting.

It is easier to cut out the belt in one long strip so that you can later cut it into the required fragments. We will need a belt for the flying part and a belt for the two halves of the trousers - the right and left legs (see dress pants treatment).

An important point about cutting pockets (Figure 2 и 3). Please note that the corner for the pocket is cut off only on the flyaway part. That is, pockets will be processed on the flyaway part and on the PP, which is not covered by the flyaway part. For the second pocket, the corner can be cut off later.

The width of the belt, as usual, is calculated by the formula

2 finished belt widths + 2 cm

On the Fig. 2 Shown is the cutting of trousers in small sizes.

On the Fig. 3 - cutting large sizes and some explanations are needed here.

The fabric is folded in half crosswise. It is important to remember here that there is only one flying part.

After cutting, we make notches along the knee level, along the darts and bow.

How to sew a dress with loose trousers with a detachable detail

1. We start with darts and WTO (wet heat treatment)as for dress pants.
2. Then pockets - on the flying part and the “opposite” PP. Processing details as in the trousers model with elastic
3. Hem and waistband on the flap piece.
4. Next, side, step, fastener.
5. Belt for each half (trouser leg) of trousers.
6. We baste the loose part and sew up the seam of the seat.
7. Trying on: we check the size of the trousers at the waist and length.
8. We grind the flying part.
9. We process the seam of the seat with two lines, strongly stretching and ironing
10. Bottom.