Every novice couturier dreams not to depend on the patterns made by others, especially since free patterns, as they say, "happy with fire ..." ...
This video tutorial on cutting technique shows cutting the front half of women's trousers - PP.
This is one of the simplest models of trousers - ladies' trousers with a one-piece belt. Beginning couturiers can easily sew them.
The procedure for cutting trousers without patterns
Fold the fabric in half face to face, the edges should be parallel to the edge of the table. The cutter stands at the edges.
We start by basing one of the fabric sections.
To do this, we apply an angle to the edges and the cut and draw a reference line. Then we cut off everything above the line.
Any cutting should start with the base.
The measurements must be recorded.
We start from the basic cut by drawing horizontal lines.
We retreat 3,5 - 4 cm - the line of the upper cut of the one-piece belt.
We measure the width of this belt from it - 3 - 6 cm - the horizontal of the waist.
Down from the waist - set aside the measurement of the height of the seat and draw the line of the seat.
We divide by three the distance between the waist and the seat and, stepping back one third up from the seat, we draw the horizontal of the hips.
From the waist down - measure the length of the trousers - the horizontal of the bottom.
We divide the distance from the hips to the bottom in half and from this half we rise up 5 centimeters. This is the level of the knee.
verticals
I will spend the first - I will outline the edges. If the edge is not stretched or torn and you have enough experience, then this is not necessary.
From the edges I measure the width of the step of the front half and draw the vertical of the bow.
From the bow - the width of the front half and put marks on the lines of the hips and the seat.
To find the ironing line - the most important constructive line of the trousers - I measure the width of the front half at the level of the seat with a centimeter tape from the edges and fold the measured length in half.
Then, I set aside its value from the edges in several places and draw a vertical line - the ironing line.
After that, I draw up a cut of the bow: along the bisector of its angle - 2 - 2,5 cm.
If there is no protruding tummy, the cut of the bow can be rejected by 1 cm towards the ironing.
The width of the front half at the waist is calculated taking into account the darts.
And to draw the side and step sections, we measure the width of the trousers along the bottom.
Step cut
We divide the step width into three parts and retreat one third from the edges. We connect the resulting point with the point along the bottom.
And to shape the bend of the crotch, divide by three the distance between the buttocks and the knee. From the upper point of division we retreat 1,5 - 2 cm, from the bottom - 1 cm.
We measure the width at the knee from the side of the step and set aside the irons on the other side.
We draw the seam lines smoothly.
We make cutouts. One must be along the ironing line. We draw the second tuck between the first tuck and the side cut. We extend the lines of the tucks on the one-piece belt of the front half.
Add seam allowances.
Patterns of women's trousers, shorts and skirts
All ready-made patterns of women's trousers...
And about that how to sew trousers men's classic, read a series of illustrated articles.
|
Join my community on Viber...
