The beginning of cutting a women's coat without a collar and a pattern, see. here.
There are two options for cutting the lining used by tailors: according to patterns and according to the product.
Let's start with the first method (Fig. 6, 7).
We start by “subtracting” the width of the facing and selection from the middle patterns of the back and front, and then adding a double allowance in the places of “subtraction” (Fig. 6).
Of course, if your patterns were cut at the waistline, they should be combined.
So, we glue the waist end-to-end with adhesive tape and simply cut off the facing and edge from the patterns of the middle parts of the shelf and back.
Please also note that the sleeve can be cut out by combining the pattern of the lower and upper halves, and add a double hem allowance of 6-7 cm along the bottom of the product.
The remaining allowances are the same as for the details of the "top".
When the correction is made to the patterns, then lay them on the lining folded in half as shown in Fig. 7.
Finished coat pattern
See the article about cutting such a coat and a full-size finished pattern.
Please note that I combined the patterns of the back and shelves along the reliefs, so that the extensions along the bottom “gone”, and along the hip line the width remained unchanged. This technique is used for cutting the lining in all products with a detachable lining extended to the bottom.
If you cut out the lining according to the product, use a ready-made back and a shelf with a processed selection.
Patterns of women's coats of different styles
Women's coats Fur coats Jackets Capes
In this case, the tucks are laid by touch and pinned with pins. After that, the conformity of the form is checkedadki and details of the "top" of the coat.
And only after making sure that the tucks are laid correctly, or rather, the lining exactly repeats the shape of the top part, it can be cut out with the necessary allowances. This cutting method is recommended only for those who have professional skills and experience, but not for novice couturiers sewing their first coat.
We lay the sleeve patterns across the fabric and do not forget about the burlap of the pockets.
If you carefully read the description of the cutting and studied the drawings, then you should not have any difficulties with sewing and another article to help you about how to make your own coat.
And also how to process a pocket in relief.
If the fabric is not too loose or thick, then you can also perform frame pocket.
Do not forget, then in this case the pocket should be located in the dubbing area.
And on the lining you can do patch quilted pocket.
Finally, don't miss the others new women's patterns , which can be downloaded almost free of charge without a subscription and registration on the Vera Olkhovskaya website.
Popular sheath dresses in ready-made patterns
|