Simple patterns for two flared skirts 4 wedges

An electronic pattern is printed out in full size on a home printer or large-format plotter. It can be printed on sheets of paper from A4 to A0. Paperless cutting through the projector is possible.

Free download Instructions for the pattern of two flared skirts

How to sew two do-it-yourself skirts using a simple ready-made flared pattern 4 wedges

Contents of the instruction:

1. Description of simple patterns for two flared skirts 4 wedges.
2. The style of the four-piece flared skirt patterns and what to sew from.
3. How to cut flared skirts 4 wedges according to the finished pattern.
4. How to sew a flared skirt 4 wedges with your own hands.

Buy and download this pattern for two skirts

1. Description of simple patterns for two flared skirts 4 wedges

Electronic patterns for two flared skirts 4 wedges 40 - 64

Sizes: 40-52 or 52-64. All sizes are printed from one file.

File Format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files patterns for two flared skirts 4 wedges for sizes from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

1.1. Scheme for assembling a skirt pattern when printing on a home printer

After printing a PDF file of a skirt pattern on standard A4 sheets of a home printer, the pattern is assembled on one large page of patterns from 25 sheets of paper.

5 rows of 5 sheets in a row. See assembly diagram on the picture.

Sewing difficulty level: easy, for beginners.

The pattern is designed for sewing at home on household sewing machines.

1.2. Set of simple patterns for two flared skirts 4 wedges

(picture 1)

1. ZP pattern - the back half of the skirt.
2. Pattern PP - the front half of the skirt.
3. Patterns of a high "corset" belt - ZP medium, ZP barrel, PP barrel and PP medium.
4. Patterns of a pocket of the cut-off barrel type with a rounded entry line - burlap-valance and burlap-turning.

Patterns for the "denim" belt are not included, as this is a strip of fabric. How to cut a belt, read the instructions below.

2. The style of the patterns of the four-piece flared skirt and what to sew from

2.1. Description of the design of the skirt for 4 wedges

Very simple skirt style - 4 wedges. Please note that PP and PP are not congruent.

Pocket - cutting barrel.

The "corset" belt consists of 8 parts (4 patterns). The belt details are symmetrical for ease of assembly.

See also corset belt pattern and how to sew a corset belt for any dress.

2.2. What to sew a skirt for 4 wedges

Any fabrics of dress and suit assortment from thin to rather thick, dense and heavy will do.

Suitable as wool, linen, thick silk and any kind of denim, as well as tight knitwear with little stretch.

Consumption for different sizes will be from 120 to 150 cm with a width of 140 - 150 cm. When sewing a skirt made of fabric in a cage, you should add another 20 - 30 cm to the set in order to be able to combine the cells.

2.3. Instructions on how to buy, how to print and others

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

Buy and download this pattern for two skirts

3. How to cut flared skirts 4 wedges according to the finished pattern

Cut simple enough that home couturiers who begin learning to cut and sew can do it.

You need to pay attention to the fact that the share in different cases can be located on the wedges in different ways.

For a denim skirt - the share can be parallel to the middle seams of the PP and ZP (picture 2).

For the "trouser" fastener - a protruding allowance.

How to make such an allowance?

Cut a strip of 3 by 15 cm from dublerin and attach PP to the half-skid, circle and cut it out.

Is it worth it to immediately cut off the barrel along the line of entry into the pocket?

You can immediately, or you can after cutting - it does not matter much.

The seam allowances are as follows:

1. to the middle and side sections - 1 - 1,2 cm;
2. do not add to the waist,
3. at the entrance to the pocket - 0,7 - 1 cm.

"Denim belt" - a strip of fabric.

Belt length in cutting = waist circumference + 15 cm (for transitional parts)

Belt width in cutting = 2 widths in finished form + 2 cm

A skirt in a cage or any other for 4 wedges can also be cut, or with a share along the wedge (picture 3).

If cutting is done on fabric in a cage, then special attention should be paid to the combination of cells.

For perfect alignment, you will have to cut one piece at a time.

The sequence is something like this:

1. Cut one RFP, and along it a mirror RFP.
2. Apply PP to the tissue section, and attach the lateral cut of the RFP to the side seam of the PP, to achieve cell alignment. We cut out the first PP, but do not cut out the barrel under the pocket yet. According to the first PP - the second mirror
3. According to the PP, we cut out the first burlap-valance and along it (along the burlap) - the second mirror.
4. We repeat the operations to combine the cells with the facial details of the corset belt.
5. Lastly, we cut out the burlap lining and the wrong parts of the corset belt. It is possible without combination.

4. How to sew a flared skirt 4 wedges with your own hands

1. Process the pocket. See video on sewing a similar pocket
2. For a denim (or similar) skirt, process the “trouser” fastener and the middle seam of the PP.
   See video how to sew a trouser fastener
   But you can just stitch overcast and iron the middle seam.
3. Sew, overcast and iron the side seams. We simply overcast the middle seam of the RFP and leave it unstitched and unswept. According to it, the final adjustment of the skirt to the figure will be performed.
4. We process the belt.
   See video master class how to process a denim belt
   Corset belt - duplicate without allowances for seams and grind off the “top”; we duplicate and grind the "wrong side"; we leave the middle seam of the RFP unstitched, but it can be overcast.
5. We sew the front side of the belt to the skirt.
   We sew the corset belt under the bones and insert the bones.
   We sew the wrong side of the belt, hiding the open sections under it.
6. Loops, trim, if provided. Loop, button, if provided.
7. We sweep the last remaining middle seam of the RFP. For a skirt with a corset belt, we sew a zipper. Trying on.
8. We process the middle seam of the RFP.
9. Bottom - in a hem with an open cut - overcast, bend once and hem. Iron.
10. Finishing skirt.