Pattern "Dress Tatyanka on one shoulder"

PDF pattern for printing on a printer or plotter in full size on the sizes of overalls from 40 to 52 (all sizes in one file).

How to sew with your own hands for beginners different options for a one-shoulder dress according to a simple ready-made pattern

Contents of the instruction:

1. Description, characteristics and drawings for the pattern.
2. How to download and print a pattern.
3. Features of a pattern with your own hands of different options for dresses for beginners.

Download this easy pattern for beginners

Description, characteristics and drawings for the pattern

Electronic pattern "Dress Tatyanka on one shoulder"

Sizes: 40-52 (buyer gets all sizes)

File format for download in order:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files dress patterns gradation sizes from 40 to 52:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Difficulty level: simple - a pattern for beginners who have already mastered the sewing of a Tatyanka skirt.

See, how to sew a skirt "Tatyanka" with warehouses or assembly.

In the set of patterns for this dresses are included

(picture 1):

patterns of a shelf, a back and a shuttlecock "sun" with a choice of length of cuts.

Since the pattern of the “Tatyanka” skirt is a strip of fabric, it is not included in the set of patterns, but the cutting of the skirt is described below.

This style of dress is designed for slim girls.

From what to sew such dresses according to a simple pattern and fabric consumption

Stable fabrics are suitable for sewing: staple, chintz, linen, thin denim, poplin, silk, crepe chiffon and the so-called "shirt fabric" (thin and dense cotton fabric, plain, printed or plaid). A similar dress made of cambric sewing or thin dense corrugated stretch will look good.

The consumption of fabric for a one-shoulder Tatyanka dress depends on the length and volume of the skirt, as well as on the type and length of the frill.

In any case, frills, skirt and bodice should be included in the expense calculation formula:

Bodice length + 10 cm for processing and fitting + flounce or frill + Tatyanka skirt

Thus, the consumption can be from 1,5 to 3,5 m of fabric with a width of 1,4 m

How to download and print a pattern

How to choose the size of a pattern without taking measurements and size charts

How to buy a pattern

How to print a pattern at home in full size on A4 sheets

Download ready-made free patterns of dresses for girls in full size

Features of do-it-yourself patterns of different options for dresses for beginners

Like other asymmetrical styles, this model should be cut without folding the fabric in half (Fig. 2-3).

For cutting, the fabric is spread on the cutting table with the wrong side up.

Edges - parallel to the edges of the table.

Open dresses with frills sun

On the 2 drawing shown cutting dresses with flounces "sun".

See photo with black, yellow, red and coral dresses.

We start by measuring the length of the Tatyanka skirt - du + 3cm for processing.

To determine the length of the skirt, you need to measure it along the side of the figure from the waist down to the desired length.

So, from the mastered (aligned) cut we measure Du+3 and draw a horizontal line.

Of course, if you need a puffy Tatyanka skirt, then you will need two strips of fabric.

Further…

To the horizontal bounding the skirt, we lay the patterns of the shelves and backs with allowances for the seams.

I remind you that you need to add seam allowances of 1 cm along the side and shoulder sections, up to 4 cm along the waist of the bodice (for the convenience of trying on), and we do not add allowances along the “oblique” section and along the armhole.

Shuttlecocks "sun" can be cut out both after fitting and before it.

We select the inner circumference of the shuttlecock based on the length of the “oblique” cut of the shelf, excluding allowances - the circle can be longer, but not shorter than this cut.

In addition, one magnificent shuttlecock can consist of two circles.

We cut out the oblique trim for processing the armholes and the “oblique” cut from the remnants of the fabric.

See video master class lesson on how to make a slanting inlay without fixtures and how to frame a cut with it

Dress with frills on a simple pattern for beginners

Now consider cutting the style with frills (picture 3).

see photo white, pistachio and beige dresses.

First, it is important to decide how wide the frill or frills will be when finished and consider how to process the bottom of it in order to decide how much allowance you need to take into account.

Of course, if the bottom of the frill is processed with a roll seam or pickled, then the processing allowance is not added.

See video master class on edge seams suitable for processing frills and flounces

And if the frill is processed into a hem with a closed cut and soft regiline, then you will need to process the bottom

Regiline width +1,5 cm

See also the video tutorial on sewing frills with regilin

For a beautiful lush frill, you will need a strip of fabric of at least 2,5 meters, that is, two strips of fabric.

The length of the finished frill can vary from 10 to 30 cm.

Cutting dresses for sewing with a border on this pattern

Cutting dresses for sewing with a border is also not difficult, but the calculation of the fabric is made according to the border (picture 4) - for a fluffy Tatyanka skirt and a fluffy frill, you will need from 2,5 to 3 meters of cambric sewing (coupon), if the lace border is located on both sides, as shown in 4 drawing.

If the border is only on one side, then the flow rate doubles.

Sewing such a one-shoulder Tatyanka dress differs slightly from sewing other dresses with a Tatyanka skirt.

The bodice is also “gathered” (shoulder and side seams are grinded and ironed, “zipper” is not needed) and the skirt and frill are “gathered” (the seam is grinded, assembly is performed, if you are sure of the length, you can also process the bottom).

See, how to trim the bottom of a skirt

И video tutorial on how to process the bottom of the frill

Without assembly tutorial video also indispensable

When the three parts of the dress are ready, you can try on.

On the fitting, the length of the bodice is specified - the bodice is put on and tied with a linen elastic band at the waist. The waistline is marked on the bodice. If necessary, the armhole can be trimmed.

Then with the bodice you can try on a skirt and frill.

After trying on, you should trim the armhole, connect the bodice with the frill and trim the cut.

And it remains only to connect the skirt with the bodice. The seam can be edged or overcast, and along the seam or its allowance, you can lay a line with rubber thread, winding it on a bobbin.

You can also lay a few lines with a rubber thread along the bodice. If this is done, it will be convenient to wear the belt - it will fix itself on the elastic bands.