( ... Products )

Site

Vera Olkhovskaya

Home » Cutting and sewing » Sewing: general questions »
Sunday, 05 May 2024
 

Video master class how to assemble

how to make assembly with fixture photo 1Vera Olkhovskaya

This sewing video tutorial shows how to assemble using a home sewing machine attachment, as well as old tried and tested methods for getting a screed from a screed of “weak” machine and hand stitches.

No-tool gathers are ideal for puff sleeve dresses and blouses.

Video tutorial on how to assemble for a chiffon blouse sleeve You can also look at Vera Olkhovskaya's website.

And assembly with a fixture is ideal for sewing tiered boho skirts and sewing on gathered lace…


Assembly with fixture

Video master class: how to make an assembly

To install it, unscrew the fixing screw on the presser foot holder and replace the presser foot.

In addition, you need to adjust the stitching: change the position of the needle (the needle should be on the left), increase the stitch length and loosen the upper thread tension.

To assemble, put one layer of fabric under the presser foot and the other in the slot of the fixture.

The bottom layer of fabric will fit.

The disadvantage of this method is the impossibility of adjusting the density of the assembly and the need for skill, that is, the skill of working with the device. I didn’t succeed at all the first time, and I’m showing you the fifth and sixth attempt, which is far from ideal.

As far as I can tell from my humble experience, a jigger gather can be used for sewing on ruffles and lace, but for sleeve gathers, it is better to use a weak machine stitch or by hand.

Now we will consider them.

Assembly with a weak machine line.

how to make assembly with fixture photo 2

To set up such a stitch, you need to loosen the upper thread as much as possible and increase the stitch length to the maximum.

Then we lay two lines without bartacks at a distance of 5 - 7 mm from the edge and 5 mm from each other. We tighten the lines for the lower unloosened thread to the desired length. We tie the ends, and distribute the assembly.

The ability to distribute the assembly and the speed of the operation makes this method very convenient for processing non-uniform assemblies.

The assembly performed manually is not inferior to the previous method, but it takes much longer to do it.

dress patterns with a sleeve like "flashlight" You can download almost free of charge, without registration and subscription

But if you wish make patterns yourself, An article on modeling sleeves will help you with this.

See also video master class for cutting a blouse made of chiffon with a sleeve that gathers under the cuffs and along the collar.

And completely free flashlight patternsto go with any new look dress

How to sew pleated skirts without darts and patterns, also read on the website of Vera Olkhovskaya.

Patterns of dresses of the new season

Dress pattern with a yoke skirt
Dress pattern with a yoke skirt
Pattern dress detachable "Christmas tree"
Pattern dress detachable "Christmas tree"
Dress pattern "Tatyanka with a bell sleeve"
Dress pattern "Tatyanka with a bell sleeve"
Dress pattern "without shoulder seams"
Dress pattern "without shoulder seams"


Dress pattern "asymmetry with a skirt" sun ""
Dress pattern "asymmetry with a skirt" sun ""
Pattern of a detachable dress with a long sleeve lantern and a double sun skirt
Pattern of a detachable dress with a long sleeve lantern and a double sun skirt
Pattern for beginners of a simple detachable kimono dress back with a wrap
Pattern for beginners of a simple detachable kimono dress back with a wrap
Pattern
Pattern "Tatyanka dress with an open back"


In addition to the topic of the video, a master class on how to make an assembly, we recommend that you see:


Back to category:
Sewing: general questions

Up-to-date information about new patterns in Viber:

Subscribe to the community of Vera Olkhovskaya in ViberJoin my community on Viber...

My Facebook page

Patterns by Vera Olkhovskaya on Facebook

View page