Processing the seam of the seat when sewing trousers

Vera Olkhovskaya

When sewing trousers, there are no trifles, and ignoring just a couple of nuances of cutting and sewing can lead to great embarrassment.

I mean the suddenly broken threads on the seam of the seat in the buttocks area.

To avoid this, when cutting, the direction of the share of the RFP is taken into account and the cut of the seat turns out to be inclined and elastic.

Then the WTO is performed and the cut of the seat is pulled back.

Watch the video master class on sewing trousers on the topic of the WTO

And, finally, when sewing, the seam of the seat should be slightly stretched and two whole straight lines should be laid at a distance of 1 - 2 mm.

The order of processing the seam of the seat of trousers

The first line should start from above, that is, from the waist.

The upper cut of the belt must be carefully fixed.

You need to understand that the exact alignment of the upper and lower cuts depends on the accuracy of the processing of the belt, and on the quality of the mark that you made when trying on.

The fact is that the most difficult moment in this operation is to combine exactly the upper cut of the belt.

We lay the second line of the seam of the seat in the opposite direction, as previously mentioned, at a distance of 1 - 2 mm from the first line and also stretch the seam in the buttocks.

If sewing is performed with a special program line in which one ordinary one locking stitch alternates, then it is enough to lay it once.

This line is very strong, but it is almost impossible to open it and if you need to sew in trousers or increase their volume, you will find yourself in an almost insoluble situation.

See about machine seams that don't tear

Therefore, if there is at least some possibility of alteration, it is better to get by with the usual straight line.

When the seam of the seat is stitched, it needs to be ironed out.

It is better to iron on a special pillow or ironing board, so as not to spoil the WTO PP.

See more about ironing pads

Then, overcast the areas that have not yet been overcast (the ends of the belt), once again iron and fasten the free ends of the belt by machine or by hand.

Patterns of men's clothing and trousers

T-shirt patterns for men with a hood Patterns of men's trousers - thermal underwear Pattern tactical military combat shirt raglan Pattern of a men's pea coat with a hood Pattern of sports trousers for men Pattern of men's trousers "classic" Pattern "hoodie-sweatshirt-bomber raglan unisex" Pattern "men's leather jacket-hoodie"

Trousers and shorts for women

Simple oversized boho dungaree patterns Simple patterns of summer women's original jumpsuit Patterns of women's sports trousers with reliefs and pockets Patterns of trousers in a sporty style of slimming and T-shirts Pattern skirt-pants two pleats, pockets and one-piece belt Pattern of semi-overalls for women "Charlie" Pattern of summer jumpsuit with shorts Trouser pattern