Pattern "cut-off coat without collar"

How to sew a spring women's coat without a collar with your own hands according to a finished pattern

The content of the instructions for sewing a coat:

1. Description of the electronic pattern, coat design and pattern set.
2. How to cut a coat with your own hands according to the finished pattern.
3. Seam allowances when cutting the coat.
4. Open doubler for a coat without a collar.

Download this women's coat pattern

Description of the electronic pattern, coat design and pattern set

Sizes: 42-52 and 52-62 (the buyer receives all sizes of the selected gradation)

Format of electronic coat pattern files:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files coat patterns of your chosen size gradation:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Tailoring difficulty level: professional.

This coat model will look good on figures of different sizes and different types. The coat can be sewn, both cut-off and non-cut-off, both single-breasted and double-breasted.

For a coat cut off at the waist, consider using a tuck seam that mimics the cut line.

Such a seam can be performed on all parts (if this is consistent with economic considerations).

But on the middle part of the shelf, the seam can be used to process loops, therefore, before you perform the layout, think about their processing.

Fabric consumption depends on the length and size of the product, as well as on the layout economy, therefore it is not indicated.

Of course, for a double-breasted coat, the expense increases. The lining consumption depends on the size and length of the product, as well as on the cutting method.

For tailoring, you can use any coat fabrics and dublerin.

The set of patterns "cut-off coat without collar" includes (picture 1): back middle part, back side part, shelf side part, two middle shelves (one for a double-breasted coat, the other for a single-breasted coat), two-seam sleeve (upper and lower half).

How to cut out facings, selection and lining is described below.

How to buy a pattern

How to print a pattern

Download this coat pattern

How to cut a coat with your own hands according to the finished pattern

As mentioned above, cutting patterns at the waist (except for the middle part of the shelf) is not desirable, as this will only add Bam work.

It is easier to make an imitation of a seam at the waist.

Having decided for yourself whether the coat will be cut off, make patterns of the desired size and length. The length is very important to take into account immediately in order to correctly calculate the fabric consumption.

When the paper patterns of the coat are ready, you should make a facing for the sprout and decide on the width of the selection (picture 2).

The facing pattern is cut out, as for a light doubler dress, with a width of 6 - 7 cm.

The selection of the upper middle part of the shelf - we cut according to the pattern of the same name from dublerin.

The width of the selection at the top is equal to the width of the facing, at the bottom 8 - 12 cm.

Of course, the wider the selection, the greater the consumption of fabric, but it is not recommended to make it already 8 cm.

And bottomI am part of the pick - a rectangle, the same width of 8 - 12 cm, so that it fits with the upper part of the pick. It also cuts out from dublerin.

Attention! All details from dublerin are cut out WITHOUT ALLOWANCES FOR SEAMS!

Seam allowances for cutting coats

Allowances for seams are already taken into account when cutting from fabric.

Now let's take a look at layouts 3 drawing (large size) and 4 drawing (medium and small sizes).

The seam allowances are as follows:

1 - 1,5 cm each on the side, shoulder, reliefs, "vertical" seams of the sleeve and the seam at the waist, if the patterns are cut;

the sprout, neck, sleeve hem and edge of the collar are cut out beyond the line of the outline of the patterns;

on the bottom of the coat and sleeves - 3,5 - 4 cm per hem.

The middle seam of the back has an uneven allowance, as the pattern is applied to the edge by the middle line. Allowances are added to the facing only at the junctions of its fragments (in the figures 3 - 4 this is the middle seam) and along the shoulder cut 1 - 1,5 cm.

When cutting the middle parts of the shelf, lay the details of the selection cut from the doubler next to the patterns. This method will help to avoid confusion and errors.

Pay attention to how the upper fragment of the middle part of the shelf is placed - the share coincides with the edge of the side.

Open doubler for a coat without a collar

When the cutting is done, we proceed to cutting the dublerin according to the same coat patterns (picture 5).

Like the previous parts from dublerin, we cut them out without seam allowances.

Back details are duplicated at the level below the shoulder blades.

The side of the shelf - so that the pocket gets into the duplicated area. Otherwise, it will have to be duplicated separately.

Medium details the shelves are completely duplicated, but ...

From this point in more detail: it is very important that the fractional dubbing takes place in the same way as in the details of the middle part of the shelf, which you cut out of the fabric.

That is, the edge of the bead must coincide with the share.

In addition, the dubbing should be glued in such a way that the distance between the dubbing of the middle parts of the shelf and the dubbing of the selection is about 0,5 cm.

This will allow you to easily and simply process the selection.

It is better to cut out the dubbing of the allowance for the hem of the bottom of the coat and the bottom of the sleeve along the oblique. Of course, in the middle part of the shelf, an indent of 0,5 cm is also required.

Read also continuation "How to cut a lining for a coat" ...