Shirt pattern for free, how to sew with your own hands and patterns of shirt dresses

Download for free a ready-made pattern of a men's summer shirt for a teenager and read how to sew it correctly according to the pattern. Also, at the bottom of the article are links for downloading ready-made pdf patterns of women's shirt dresses.

For beginners, this model will seem difficult because of the collar and pockets, so the difficulty level is medium. For a detailed step-by-step instruction for beginners for this pattern, read below ⬇️.

The content of the article:

1. A set of free patterns for sewing a shirt.
2. How to sew a shirt step by step for beginners.
3. Ready-made pdf patterns of women's dress shirts.
4. Patterns of dress shirts of other models for women.
5. A series of lessons for beginners on tailoring shirts.
6. Paid patterns of women's dress shirts.

1. A set of free patterns for sewing a shirt

The list of patterns is shown in 2 drawing, and the maximum fabric consumption is about 100 cm.

For an accurate calculation of the fabric, a preliminary layout is desirable.

1.1 Economic layout for cutting a shirt according to a pattern

You need to talk more about the economical layout.

Please note: the front and back are cut out without fasteners and seams, that is, there should be fabric folds on the half-slide and the middle line of the back.

Therefore, it is convenient to cut out the details of the product in three stages.

First, cut out the shelf and back (picture 3), folding the fabric as shown in the upper part of the figure - along the width of each part.

Then the rest of the cut is folded in half and the sleeve and yoke are cut out.

We lay the yoke so that the middle seam (of the back) coincides with the share direction.

On the 3 drawing the middle seam of the coquette is located at the edge.

We continue cutting out fabrics from lunges, after cutting out the remaining parts (collars, selection and valves) from doubler and heating the iron.

1.2 We do cutting like this

1. We glue the dubbing with an iron in the desired fractional direction onto the fabric and cut it out with technological allowances.
2. We lay the upper collar in the middle line along the lobar thread, and the lower collar along the oblique thread, that is, all sections of the part are “oblique”.
3. Pick-up - so that the edge of the side coincides with the share direction, the valve - across the share.

Let us consider in more detail the cutting of the selection (from dublerin) and burlap (from the main fabric, lining or any thin cotton fabric).

Pickup

We circle the cut yoke (this is important: it is the yoke cut out of the fabric, and not the paper pattern) along the neck, the edge of the side and the cut of attaching the yoke to the shelf (picture 4).
We draw the missing line smoothly.
The exact position of the shoulder seam is not necessary.

Burlap is cut even easier - according to the finished valve. Attention!
Not according to a pattern, not according to a piece cut out of fabric, but according to a completely finished valve.

The shape of the burlap is a rectangle, the width of which is 4 cm more than the width of the finished valve, and two corners are rounded.

2. How to sew a shirt step by step for beginners

1. Manufacture of the valve, collar and processing of the edge of the board. When processing the bead, do not touch the neck.
2. Stitch the collar and work the neckline.
3. Connect the finished sides at the place of the fastener, aligning the half skid.
4. Pocket. Mark the pockets on the shelf according to the width of the burlap. Place shelves of burlap on your face and stitch it with a line at a distance of 1,5 - 2 cm from the top edge of the shelf (picture 5). Please note that the line rises to the cut and does not reach the vertical cut of the burlap by 2 cm. And the distance between the beginning and end of the line should be 0,2 - 0,5 cm less than the width of the valve so that the entrance to the pocket is completely covered by it .
5. When the lines are laid, the excess above them is cut out, notches are made in the corners and the entrance to the pockets is turned inside out.
6. The burlap is folded inside out, the seams are straightened out, sewn with oblique stitches about 1 cm long, and at the end a finishing line is laid.
7. The entrances to the pocket are ironed.
8. Then the second ones (burlaps) are superimposed on these already stitched burlaps, they are ground down and overcast.
9. Ready-made valves are superimposed on the pockets, basted and adjusted.
10. The shelf and back are connected to the yoke.
11. We sew a sleeve (see also the article about stitching sleeves).
12. We process the bottom of the sleeve and shirt.

3. Ready-made pdf patterns of women's dress shirts

3.1 A simple pattern of a women's blouse shirt for sizes 40 to 64

PDF pattern in full size and without seam allowances for sizes 40-64. Printing on A4-A0 sheets.

Instructions on how to cut and how to sew according to the finished pattern. The pattern is designed for sewing at home on household sewing machines. When sewing, you can do without an overlock.

Sewing difficulty level: easy. The model is suitable for any figure.

Read the instructions and download the pattern...

3.1 Ready-made pdf pattern of a shirt dress for sizes from 42 to 62

According to this pattern, in addition to a straight dress, shirts can be cut tunic, blouse and straight-cut denim dress.

In addition, the pattern can be used to model the above products.

And, if you combine the bodice of the shirt (cutting off the cut to the waist) with the “Tatyanka” or with the sun skirt, you get a straight dress in the New Look style.

Download a shirt dress pattern and read how to sew ...

4. Patterns of dresses for shirts of other models for women

A simple pattern of an oversized shirt dress with a pleat Patterns of a loose dress-shirt on a yoke with a relief Pattern of a straight shirt dress with a one-piece sleeve Pattern of a straight shirt dress Pattern of a floor-length shirt dress with long sleeves and non-stop sleeves Dress pattern "tunic-shirt" Boho shirt dress pattern Pattern "dress-shirt with a difference in length"