Size charts What is the height of the pattern Payment methods Ask a question Reviews
Free download Instructions on how to sew a shirt dress for this pattern
Electronic ready-made pattern of a life-size straight shirt dress for measurements from 42 to 62.
All sizes are printed from one PDF file of the pattern. It can be printed both on a home printer and on a large-format plotter. Sheets of paper from A4 to A0. Paperless cutting through the projector is possible.
How to sew a straight shirt dress with your own hands according to the finished pattern
Read this guide:
- What can be sewn on this pattern.
- Fabric for a shirt dress, a set of patterns and how to download them.
- How to cut and sew a dress, tunic or blouse in one pattern.
What can be sewn on this pattern
According to this pattern, in addition to the shirt dress, you can cut tunic, blouse и denim dress.
Sizes: 42-62 (the buyer receives all the gradation of sizes in one pattern file).
The file format of the electronic pattern of the shirt dress:
PDF in full size and without seam allowances.
After paying for the order, you will receive links to download two files patterns of a dress of a shirt of gradation of the sizes from 42 to 62:
- PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
- Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.
Sewing difficulty level: easy for beginners.
The model fits most figures. Straight cut silhouette.
In addition, the pattern can be used to model the above products.
And, if you combine the bodice of the shirt (cutting off the cut to the waist) with the “Tatyanka” or with the sun skirt, you get New look dress.
Fabric for a shirt dress, a set of patterns and how to download them.
For sewing a shirt dress, tunic or blouse, you can use any dress fabric, including thin jeans.
Exclusion of highly stretchable stretch.
The set of patterns, in addition to the front and back, includes two sleeves and a collar (picture 1).
Consumption depends on the length of the product and the length of the sleeve. You can calculate the cost like this:
Shelf length + sleeve length + 6 cm
Attention! This consumption formula is NOT suitable for products with a setting bar!
How to cut and sew a dress, tunic or blouse in one pattern
"I sew myself!" - a statement obliging to make a choice between many options. To make your choice conscious, consider the most obvious of them.
Cutting and sewing shirt dresses
Cutting a shirt dress is not difficult, but before cutting it, you need to make patterns of the length you need.
If desired, you can also make roundings on the bottom on the patterns. If you have not yet decided whether rounding is needed, you can make them on the details of the cut.
Consider thoseNickname for performing rounding according to the template.
Cut out a square from thick paper or cardboard (picture 2), whose side is equal to the height of the cut.
We put the leg of the compass in one of the corners of the square and draw an arc with a radius equal to the height of the cut. We cut the square in an arc and use the resulting figure as a pattern.
On the 2 drawing roundings of various sizes are shown. Last, on figure 2c, made with an indent from the side seam.
Now let's deal with the sides and fasteners. On the figure 2a shows a shelf of a dress-shirt with a "set-in" clasp.
See also "How to process a set-in bar"
In this case, the semi-skid allowance is not needed and the shelf is laid on the fold of the fabric.
If your dress, tunic or blouse has a one-piece hem (Photo 1 и Photo 3), 5-6 cm should be added to the half-skid. And for the adjustment bar - 2,5-3 cm (Photo 2).
About the rest of the allowances: side-shoulder, vertical sections of the sleeve, bottom - 1 cm, armholes, neckline, sprout, sleeve hem - for the line of the outline of the pattern, collar stitching cut - 1 cm, and along the departure of the collar - 0,7 - 1 cm.
The cuff is rectangular, its width in cutting is 8-10 cm, and the length is equal to the girth of the wrist plus 6 cm.
You can read about allowances and processing of the slip fastener here.
How to cut a trim bar
As for the setting bar, you should be especially careful when placing it on the fabric, since it is it that is the most prominent part of the product.
In most cases, it should be cut along an oblique thread, and if the fabric is in a cage, on the upper (right for women) bar, the pattern should be the same throughout its entire length.
Of course, that additions in this detail are unacceptable - it must be integral.
From all these rules, it follows that the consumption of fabric for a product with a tuning bar, especially in a cage, may be greater than for the same product with a one-piece selection or a slip fastener.
Keep this in mind when choosing a style variation.
On the 3 drawing shows perhaps the most wasteful layout of a shirt dress. The back and collar patterns are laid to the fold, the tuning bar is along the oblique thread.
The sleeve is shirtless non-stop.
To save in this case (4 drawing), I propose to cut the sleeve, retreating ¼ of its width from the back seam, that is, at the place of the elbow roll.
Cutting the pattern into fragments in this way will save about 20 cm of fabric and make it easier to sleeve slot processing.
It remains to add that the width of the tuning bar is 4,5 - 5 cm, and in finished form - 2,5 - 3.
How to cut a dress with a Tatyanka skirt (Photo 4) and a dress with a sun skirt
Of course, both models have a shirt-cut bodice.
We make patterns for shelves and backs up to the waist line.
Dress with a Tatyanka skirt (picture 5). The pick-up is one-piece.
Sleeve - ¾, while you can use both a sleeve with a fit and a shirt (non-stop) sleeve.
Cuff-lapel - a rectangle cut out along an oblique thread.
Its width in the cut is 8 - 10 cm, the length is equal to the width of the sleeve.
The skirt is a rectangle of fabric.
Open dresses with a skirt "sun" flared (picture 6) differs only in the skirt.
I remind that skirt pattern "sun" flare is in the section "The ABC of the Patternless Cut" and the pattern, in this case, is not the skirt itself, but an oval lunge at the waist.
Sewing such dresses is not difficult, especially if you read the article "How to Sweep a Sleeve".
Pay special attention to the place where the sewing in of the non-stop sleeve is described.
Also look at the site for other models with instructions on how to sew them with your own hands for beginners in the section:
Download this pattern pdf:
Pattern of a straight shirt dress
$2.00 (80 hryvnia)
Bank cards of the Russian Federation are not accepted for payment!
Size charts What is the height of the pattern Payment methods Ask a question Reviews
Vera Olkhovskaya in social networks:
See similar clothing patterns and how to sew on them
-
Any pattern for free for a review of a previously made order
Lifetime promotion for buyers of patterns!
Leave a review about my store of patterns for an order that you made before, and you will receive any paid pattern of your choice Free!