Vera Olkhovskaya
Trying on men's dress pants is done after finishing the waistband and, if you've done it right, is one of the easiest parts of sewing.
Beginner couturiers make two common mistakes:
- the first - add an allowance at the waist,
- the second - they sweep and try on trousers immediately after cutting.
This is followed by atypical errors if sewing continues.
Rules when trying on men's classic trousers
So, the fitting should be done after the belt has been finished, while the seat seam has not yet been finished.
Baste the seam of the seat, taking into account the added allowances, and put the trousers on the customer.
Basting should be done very carefully with locking stitches.
The belt at the upper cut should be especially firmly swept, otherwise it will be difficult to determine the exact volume of the product at the waist, and the waist is the most important moment of fitting.
If you have done everything correctly before trying on, the trousers will fit well.
You only have to clarify the degree of fit at the waist and hips, "adjusting" the middle seam.
The length of the trousers is noted after making adjustments to the middle seam (aka seat seam).
If you need to change the volume of the product, sweep the seat seam again without letting go of the customer and try on the trousers again.
Length marks should be placed on the RFP of trousers in the ironing area (on the “arrows”) at floor level or at heel level, if the customer is shod.
Features of trying on trousers of different styles
Very tight trousers can be shorter than classic ones, their length may not reach the heel level, and the bottom is beveled in such a way that the trousers are 1 - 2 cm shorter in the middle of the PP.
The discussion of the length of the trousers is a separate topic. The length may depend not only on the volume of trousers or the wishes of the customer, but also on the fashion.
If you have little experience, it is better, without letting go of the customer, to sweep the bottom and put on the trousers again.
This will not only increase the accuracy of meeting customer requirements, but also save you from rework.
As you can see, fitting should take you to the finishing line of trousers sewing.
In conclusion, a little about sewing women's trousers, in particular about fitting.
In sewing ladies' trousers with a fastener in the side seam, the fitting goes according to the same scenario, but the fit can be carried out both in the front along the bow seam and in the back along the seat seam.
Patterns of men's trousers and other clothing for men
Patterns of women's trousers
Watch the video tutorial on sewing women's trousers
|
||||||||||||
Join my community on Viber...
