Pattern of summer semi-overalls with a smell

PDF pattern for printing on a printer or plotter in full size on the sizes of overalls from 40 to 54.

In the photo, see the sewn products according to this pattern, which were sent by customers Tasha Pavlovskaya, Olga Novitskaya and Lyudmila Eroshenko.

Download for free instructions on how to sew to the pattern of this wrap overalls...

Buy and download this jumpsuit pattern

Instructions on how to sew semi-overalls with your own hands according to the finished pattern

Read this guide:

1. Style, set of patterns and fabric consumption for overalls.
2. How to download and print patterns.
3. Choosing the size and how to cut.
4. How to sew semi-overalls with your own hands.

Download the pattern of semi-overalls

The style of overalls, a set of patterns and fabric consumption

Semi-overalls for women with a summer smell - an electronic pattern.

Sizes from small 40 to full 54 (buyer gets ALL sizes).

File format for download in order:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files patterns of summer semi-overalls gradation of sizes from 40 to 54:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Sewing difficulty level:
depends on the processing chosen and this description discusses a simple way to pattern suitable for beginners learning to cut and sew.

The silhouette is loose, so the style fits most figures of any height.

The set of semi-overalls patterns includes:

(picture 1)

1. shelf pattern;
2. back pattern;
3. departure part;
4. two whips.

Marked on the patterns two options neckline and sprout - “boat” and “triangle” (aka “cape”).

Fabric consumption for semi-overalls for this pattern:
depends not so much on the size, but on the length you choose.
With a full length, the flow rate will be 310 - 340 cm, and with a length of 3/4 - the flow rate will decrease to 270 - 280 cm.

This is with a standard fabric width of 140 - 150 cm.

Fabrics for sewing summer semi-overalls:

For sewing such a jumpsuit, it is advisable to choose natural cotton or linen fabrics.

Suitable traditional "linen", thin denim, shirt or dress chintz, cotton satin dress, cotton poplin.

How to download and print patterns

How to buy an electronic pattern.

How to print a life size pattern at home on A4 sheets.

How to choose a pattern size without taking measurements and using tables.

Ready-made free life-size patterns download for trial.

Download this pattern of wrap overalls...

How to choose the size of the pattern and how to cut this summer dungaree

At the stage of choosing the size, you should pay attention to the fact that the allowance for a loose fit is 6 cm, that is, the increase in the chest (Pg) is 6 cm and the increase in the hips (Pb) is also 6 cm. This is a very loose jumpsuit, but you can do not follow the "letter" of the size, but simply choose the overalls of the volume you need.

Of course, the task will be simplified if you can compare the pattern with overalls or trousers.

The zipper can be omitted, but if necessary, it is better to sew it in front and use a thin hidden braid.

Attention should also be paid to the fact that the seat line in overalls, especially in loose and stable fabrics, should be significantly underestimated. That's why for tall girls pattern will have to cut along the waist line and move apart a few centimeters for lengthening, comparing the length of the bodice and the position of the seat with finished products.

For a small girl you can lay a fold on the pattern in the waist area, based on the length of the body.

Correction overalls on fitting can only be carried out by lengthening or shortening in the shoulder area.

The direction of the equity threads is noted in detail. When laying out the shelf and back when cutting, it is worth placing them on the cut in such a way that the fractional thread is strictly perpendicular to the lines of the bottom and knee. Thus, the cuts of the half-skid-bow and the seat-middle seam should not coincide with the shared direction.

The layout option for cutting is shown in 2 drawing.

And in the departure part, the fractional part is parallel to the half-skid (middle line).

Seam allowances - standard - 1 - 1,5 cm each, with the exception of armholes, necks and a cut of the side of the flying part - allowances are not added to them (when tracing the patterns, the required allowance is 0,2 - 0,3 cm and no more is needed). On the bottom - 2 - 2,5 cm. For straps - 0,7 - 1 cm for ease of turning.

As for the simplest way to process the neckline, armholes and flyaway, it is better to use bias trim cut from the same fabric or from a thinner companion.

See how to trim a neckline with bias tape without edging

How to sew a semi-overalls with a smell with your own hands step by step

1. Trim the side of the flyaway part and the neck with the inlay, turn and iron the tabs, connect the small tab with the ledge of the side.
2. For home couturiers with sewing experience, attaching a strap to a flying part has a more intricate sequence: one of the blanks is stitched to an already processed ledge, and then the strap is turned.
3. Next - grinding of the shoulder seams, including the seam of the flying part. Can be used sewing seam - it's stronger.
4. Carefully iron the treated cuts and seams.
5. This is followed by the processing of darts and armholes. It is better to process the right tuck for the chest separately on the shelf and on the flying part, but if the overalls are made of very thin fabric, then you can process them together.
6. Armholes and darts are carefully ironed.
7. We sew a larger strap with the wide end to the left side cut, attaching it to the waistline on the bodice. The area of ​​application of the strap is marked in figure 1.
8. The side seams are ground down and ironed or ironed out depending on the thickness of the fabric, the cuts are overcast on an overlock or edged with an oblique inlay. Please note that the right side seam is not completely sewn - leave up to 10 cm to process the bottom.
9. The crotch seams also grind down and it is better to use a backstitch for them, especially if the fabric is thin.
10. The only seam left is the middle one. It is better to sweep it and try it on. At the fitting, you can specify the degree of fit (freedom) of the overalls and, if necessary, adjust the middle seam. At this stage, you can also decide whether you need a zipper and how long.
11. We complete the sewing of the overalls by processing the middle seam and the bottom.

See other models of this type of women's clothing with instructions on how to sew in the site section at the link below

Overalls patterns