Tulip skirt pattern with pockets

PDF pattern for printing on a printer or plotter in full size for skirt sizes from 40 to 52. Can be printed on a home printer or plotter on sheets of paper from A4 to A0.

In the photo, look at the option sewn according to this pattern by the customer Alexandra Vlasova: "The fabric is dense, but not thick (like denim) cotton 55%, lyocell 45%. The fabric was bought on the stock of Italian fabrics with a measured flap - 0,75 meters with a width of 140, I only had enough for size 46. For reasons of economy, I did not make the bar. I am very pleased with the skirt! Thanks for the pattern!"

Free download instructions on how to sew a skirt pattern with pockets

How to sew a tulip-shaped wrap skirt according to a pattern with your own hands

Read the guide for beginners:

1. Description of the style of the skirt, fabric for it and a set of patterns.
2. How to download, print and assemble a full-size skirt pattern.
3. How to cut this skirt according to the finished pattern with your own hands.
4. How to sew a wrap skirt in detail and step by step for beginners.

Download tulip wrap skirt pattern

What is in the set of patterns for sewing a skirt, a description of the style and fabrics

File format for download in order:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files gradation skirt patterns sizes 40 to 52:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Sewing difficulty level is medium.

The style is suitable only for slender girls.

A set of patterns for patterns of a wrap skirt with a tulip cut with pockets

(picture 1)

1. Pattern PP (front half).
2. Pattern of the back half (ZP) of the skirt.
3. Plank pattern.
4. Patterns for pocket details and belt details.

See skirt pattern sketches on the image.

After downloading and printing the PDF file of the pattern, you will get all the full-size patterns of details that you can assemble and cut with your own hands to the size of the tulip wrap skirt with pockets that you need.

How much and what kind of fabric is needed to sew this skirt

Any sufficiently dense fabric can be used for sewing.

For example, tight thin knitwear with little stretch, thick silk or thin denim.

Velvet on a knitted basis is also suitable.

Fabric consumption on a skirt 85 - 95 cm, depending on the size, with a canvas width of 140 cm.

How to download, print and assemble do-it-yourself skirt patterns

How to download a PDF pattern skirts.

How to print a full size pattern file at home on A4 sheets.

How to assemble a pattern with your own hands after printing.

How to choose the size of a pattern without taking measurements and using tables.

Download free patternsto try to print, assemble with your own hands and sew according to them (I advise everyone who does not have experience in using PDF format electronic patterns for sewing).

Download the pattern of this skirt

How to cut this wrap skirt with tulip pockets

Cutting the skirts of this model is not difficult - the fabric is folded in half face to face, the details of the skirt are laid out taking into account the shared direction (pictures 2 or 3).

When cutting, pay attention to the fact that you need to cut out the upper and lower belt.

Allowances for seams when sewing a skirt according to this pattern

The seam allowances are as follows: add 1 cm to the side seams, the cuts for attaching the strap, to the cuts of the belt and the cuts of the burlap; do not add to the cut of the waist; along the pocket entry line - at least 0,5 - 0,7 cm; on the bottom - 2,5 - 3 cm.

Separately, it is worth mentioning the allowances for the bar. Since the cut of the bar with a protruding angle after stitching will extend the cut of the waist and fall under the belt, we do not add allowances to it. The rest are 1 cm.

Another point that deserves attention regarding the allowances and the fitting of the skirt. Fitting this skirt to your figure is quite simple if you make adjustments along the middle seam of the RFP, which is processed in the penultimate turn, that is, before processing the bottom of the skirt. For girls prone to weight fluctuations, it is recommended to add an extra 1-2 cm to the middle seam of the RFP, to the middle seam of the RF belt - too.

And a little more about the rational approach to seam allowances. As you can see, the set of patterns includes two pieces of burlap - burlap-valance and burlap-turning. They can be cut as separate pieces or combined into one, as shown. in figure 2.

It is more convenient to cut burlap with separate details if you are edging the open sections of the product or cutting out burlap-turning from another fabric, for example, from lining or satin. In other cases, the details of the burlap can be combined.

Immediately after cutting, do not forget to mark the half-skid line on both PPs with threads - this line is very important and should be preserved until the skirt is ready.

How to sew a wrap skirt in detail and step by step for beginners

1. We start with tucking and ironing soft folds on the PP and with the processing of darts with an indispensable thorough ironing on the RFP.
2. Then we process the pocket: we grind the entrance to the pocket with a burlap-turning, we put a burlap-valance, we make bartacks, we grind and overcast the details of the burlap.
3. Each operation is accompanied by a thorough ironing of the processed node.
4. After the pocket, we overcast it on an overlock or turn over the side and middle seam, iron it.
5. We iron the bar along, having previously duplicated one of its halves to the fold. At the same time, it is desirable that dubbing does not fall into allowances.
6. We process the bottom of the bar, not forgetting about the iron. As dubbing, it is desirable to use a thin knitted doubler or interlining.
7. We sew overcast and iron the bar.
8. The allowance on the bottom of the skirt is still unfinished. Later, he will overtake the bar.
9. Now comes the crucial moment: you need to impose the right PP on the left, aligning the half-skid and sweep in this position.
10. We attach a belt to the connected PP, to the RFP too.
11. We iron the seam.
12. After that, we grind and iron the side seams, sweep and iron the middle seam of the RFP, leaving the area under the zipper not swept. Lightning is also desirable to take.
13. After finishing the side seams, the skirt can be tried on to refine the fit at the middle seam. Achieving the perfect fit in this case is not difficult.
14. At the end of the fitting, we only have to process the middle seam, sew on the zipper, the lower belt and the bottom.

You might be interested in a simple wrap skirt for beginners

A simple pattern of a summer long wrap skirt