Pattern for full coats - jackets

Electronic pattern of a coat - a jacket for women for sizes 52 to 64. Printed in full size on a printer or plotter on sheets of paper from A4 to A0. Paperless cutting through the projector is possible.

Free download instructions on how to sew a coat-jacket for this pattern...

For a jacket coat pattern for sizes from 42 to 52, see this link ...

Buy and download a pattern in sizes from 52 to 64

How to sew a coat with your own hands - a jacket for women in large sizes according to a pattern for full

Read this guide:

1. Description of the electronic pattern of the coat - jacket.
2. A set of patterns, a description of the design of the style and what to sew.
3. How to download and print a pattern on a printer or plotter.
4. How to cut a women's coat - a jacket of large sizes according to a simple ready-made pattern.
5. How to sew a coat - a jacket at home - sewing sequence.

Buy and download this pattern coat - jacket

1. Description of the electronic pattern of a coat - jacket

Patterns for full coats - jackets.

Sizes: 52-64, the whole range of sizes in one file.

File format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files patterns of a coat - a jacket from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter in Adobe Reader.

Scheme of assembly of a pattern of a coat - a jacket on sheets of A4 paper

When printed on a home printer, the pattern is assembled on two large pages of patterns, 25 sheets of A4 paper each page:

1. 1 page of patterns - 5 rows of 5 sheets of A4 paper in a row.
2. 2 page of patterns - 5 rows of 5 sheets of A4 paper in a row.
   Total: 50 sheets of A4 paper per pattern.

See the assembly diagram in the figure

The sewing difficulty level is PROFESSIONAL - it assumes the presence of stable skills in cutting and sewing outerwear.
The style is designed specifically for the full.
Pattern is for personal use only. For sewing, you will need professional home sewing equipment.

2. A set of patterns, a description of the design of the style and what to sew

2.1. Complete set of coat patterns - jacket for full

(picture 1)

1. Back patterns - middle part and side.
2. Shelf patterns - the middle part with a single-cut fragment of the selection and the barrel.
3. Podbort (upper part).
4. Two-sutural classic "jacket" sleeve.
5. Collar "jacket" (used in ladies' products).
6. Shelf lining (middle part).
7. Burlap pocket.

The rest of the lining patterns are not included in the kit, as they are cut out according to the “top” patterns. How to cut them is described below.

2.2. Description of the design of the coat pattern - jacket for full

The pattern is made on the base with reliefs and a tuck for the chest on the middle part of the shelf.

The shelf has a protrusion of a one-piece selection - for ease of cutting, saving processing time and, of course, to improve quality.

It is worth noting that for full patterns without a tuck for the chest (separate or embedded in the relief) they are not suitable, since they do not give a good fit.

2.3. What to sew a coat - jacket

Drape, tweed and boucle are the most common fabrics for sewing a demi-season coat.

More about coat fabrics

The consumption of the "top" fabric will be 270 - 300 cm. Lining fabric - up to 250. This is with a width of 140 - 150 cm.

The consumption of dublerin in most cases will be one length of the shelf pattern.

3. How to download and print a pattern on a printer or plotter

How to choose a size without using tables and taking measurements ...

How tall are the patterns...

How to buy a ready-made electronic pattern ...

How to print a pattern at home in full size on A4 sheets or on sheets of any other format.

How to assemble a pattern after printing ...

Simple patterns for dresses, sweatshirts, skirts and trousers in full size free download...

Buy and download this pattern coat - jacket

4. How to cut a women's coat - a jacket of large sizes according to a simple ready-made pattern

Attention! Sewing a coat - a jacket is not suitable for learning to cut and sew! Couturiers will need well-formed skills in working with coat fabrics, as well as skills in sewing outerwear.

Seam allowances and dubbing are shown on 2 drawing. Equal direction - indicated on the finished patterns.

Cutting should begin with doubler, the details of which are cut out without seam allowances.

The middle part is completely duplicated, but along the fold lines of the lapel and the edge of the side, the dubbing is cut so that the gluing is carried out at intervals of 0,5 cm along the cut lines (picture 2).

The middle part of the back and both barrels are partially duplicated, as shown in the figure. At the same time, the side of the shelf can be completely duplicated if the fabric is loose and soft, such as boucle, cashmere or some varieties of tweed.

The slot is duplicated separately. The bottom of the coat will be duplicated later, after the second fitting.

Cutting out the lower collar and dubbing for it is better to postpone and cut them out after the first fitting.

Pay attention to how you should prepare the sleeve pattern if you want to use it repeatedly (figure 2 e - in a bubble).

The sleeve and the pick-up can also be cut out for a second fitting with individual tailoring.

Shoulder, side seams, as well as front and elbow sections of the sleeve - add 1 - 1,2 cm each.

On the sprout, armhole and sleeve hem, seam allowances are not needed so as not to distort or shorten the curves of these sections.

The edge cut of the shelf and the neck will require a processing allowance of 0,7 - 1 cm. Usually, no allowance is added along the neck and along the edge of the edge.

On the bottom we add, as usual, 3,5 - 4 cm.

Separately, you should talk about the allowance for the middle seam of the back. For processing, the same 1 - 1,2 cm is enough, but do not forget the allowance for slots - 5 - 6 cm.

Of course, the slot can be located not only in the middle seam of the back, but also in the two reliefs of the back.

But the allowance for the turning edge of the selection should be added. Enough 0,7 - 1 cm - depending on the thickness of the fabric.

Along the cut of attaching the upper part of the band to the one-piece section of the same band - 1 - 1,2 cm.

The lower collar is an allowance of 0,7 - 1 cm, and along the stitching cut - 1 cm.

For the upper collar, the allowance for the turning cut increases to 1 - 1,5 cm, depending on the thickness of the fabric, and for the stitching cut - 1 - 1,5 cm.

Please note that the lower collar consists of two halves. This is due to the shared direction along the raskep line. On the middle seam of the lower collar, the seam allowance is 1 cm.

The upper collar is one-piece and the share thread runs parallel to the middle line of the collar.

And about the size of the collar: it is not specified and should be cut out based on the length of the neck, which will be known only after processing the lapel. Size correction occurs along the midline of the collar.

For the middle details of the back and shelves, the share goes along the middle lines. For selection, the share is parallel to the edge of the lapel. And for the upper half of the sleeve, it passes through the extreme points of the front cut of the upper half.

For the lower half of the sleeve, a slight deviation of the share direction is allowed, and additional stitching is also possible to save fabric.

See video master class how to stick dublerin on a coat...

An approximate layout of the "top" of the coat is shown in 3 drawing. Details that are cut out after fitting are outlined, but not cut out. In other words, you need to make room for them.

The marking of pockets in individual tailoring is carried out at the first fitting, but since for this style the pocket is provided in the seam of the relief, it can also be marked during cutting. We retreat down from the waist 5 - 7 cm - the top point of the pocket. From it down 15 - 16 cm - the second point of the pocket. In order not to be mistaken with the size of the entrance to the pocket, you can attach a palm to the part for a guide.

If we talk about the rest of the notches and markings, then it is advisable to make notches at the waist, half-skid, along the inflection line of the lapel, along the edge of the side; at the highest point of the eye (others by eye do not make sense due to fittings).

Further, the notch in the corner is very important, which forms a one-piece bead and the edge of the bead (picture 2 - marked with blue scissors). You can mark the end of the collar with a notch, but you can mark it on the fitting.

And finally, consider cutting lining (picture 4), which also should not be cut for the first fitting.

The allowances are the same except for the bottom. Since in women's coats the lining is made to fly away, you will need a double wide hem. Therefore, feel free to add 5 - 7 cm along the bottom.

You will also need an allowance for the slot, but you can make another slot in the middle seam in the area of ​​​​the shoulder blades to provide additional freedom for the lining.

To save the lining, the sleeve is cut out with one elbow seam, it is possible in the transverse direction.

5. How to sew a coat - jacket at home - sewing sequence

1. After cutting, be sure to mark with a thread the lines of the edge of the pick-up, half-skid and inflection of the lapel on both shelves.
2. We glue the dubbing, iron the kink of the lapel and the hem.
3. We sweep the "vertical" and shoulder seams, lightly iron. We sweep a one-piece fragment of the selection with large oblique stitches.
4. We prepare the shoulder pads and tack to the shoulder seams.
5. First sample. Marking pockets, if not done. Armhole correction according to the figure, correction of the outlines of the lapel, volume correction, etc.
6. Processing pockets, shoulder and vertical seams. Selection processing.
7. Cutting and dubbing the lower collar, sleeves and lining.
8. Sweep the sleeve, the lining can be processed completely, sweep the pick up again.
9. Second sample. Collar adjustment if necessary. Marking the junction points of the sleeve and armhole, based on the features of the figure. Determining the length of the sleeve and the length of the product.
10. Processing slots and bottom.
11. Lined sleeve processing.
12. The connection of the "top" and lining.
13. Collar processing.
14. Collar stitching.
15. Processing the bottom of the lining.
16. Fastening of bands and lining.
17. Loops, buttons.
18. Product cleaning and finishing.