Simple patterns for a summer blouse with a bow for beginners

How to sew a blouse with your own hands according to a pattern for beginners

Read this guide:

1. Description of patterns for blouses.
2. How to download and print patterns.
3. How to cut this blouse according to the pattern with your own hands.
4. How easy it is to sew this blouse for beginners step by step.

Download the pattern of this simple summer blouse

Description of blouse patterns

PDF electronic file of a pattern for printing with your own hands on a home printer of a pattern of a simple summer blouse with a bow.

Dimensions:

1. Blouse pattern file for sizes 42 to 52.
2. Blouse pattern file for full sizes from 52 to 62.

(the buyer receives one of the gradations of all sizes)

File format for download in order:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files patterns of a blouse of the gradation of the sizes chosen by you:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Difficulty level: easy. This pattern is for beginners.

A set of patterns for a simple summer blouse (picture 1)

1. Shelf pattern.
2. Back pattern (see picture with pattern for the front and back of the blouse).
3. Pattern of a stand-up collar in a blouse.
4. Pattern of a bow and belt for a blouse - you can Free.

For tailoring, thin fabrics such as chiffon, thin silk and thin stretch are suitable.

The consumption will be the length of the shelf plus 30 cm.

How to download and print a do-it-yourself blouse pattern

How to buy a pattern

How to print a pattern life size on A4 sheets at home

How to determine size without tables and taking measurements

Full-size ready-made patterns free download - to try printing and assembling patterns with your own hands.

Download this blouse pattern for beginners

DIY pattern of this plain summer blouse for beginners step by step

Everything is very simple, if you do not complicate ...

The fabric is folded in half, face inward, the edges should be aligned and parallel to the edge of the table.

Patterns of the shelf and back are stacked "jack" with the following allowances for the seams:

1. along the midline of the back, shoulder and side seams - 1 cm;
2. the sprout, neck and armholes are cut out beyond the line of the outline of the pattern; stand - with allowances of 1 cm.

Do not forget to transfer the notch, which limits the neck assembly, to the cut shelf.

The rack should be cut "upper" and "lower", of course, "upper" without a seam in front.

Separately, I will tell you about cutting a bow for this blouse.

1. In fact, this is a quadrangle, so feel free to cut off a strip with a width equal to double the width of the finished bow + 2 cm.
2. The length of the bow can vary from 1 meter to 1,4 meters.
3. After cutting off a strip of fabric of the desired length and width, iron it in half lengthwise and then fold it across, that is, four times.
4. Cut 2 cm from the fold and 2 cm from the ends as shown in figure 2.
5. If it's hard download free bow pattern and choose one of them.

Belt - a strip of fabric whose width is equal to:

double the width of the finished belt + 2 cm

How to sew this simple summer blouse step by step

1. We grind, weave, iron the shoulder and side seams.
2. We grind the middle seam, overcast and iron it out, leaving a fragment under the fastener unstitched.
3. I remind you that stretch stitching should be done with a knitted seam or a zigzag. See Machine seams. Sewing products from stretch» and video master class "How to set up an overlock and how to sew knitwear"
4. We perform assembly along the neckline and along the bottom of the blouse by machine or by hand.
5. We grind the collar and sew it into the neck. Watch video tutorials for beginners "How to sew a collar".
6. We iron the belt in half lengthwise and measure its length, applying it to the hips. Attention! the belt should be quite tight on the hips and not move below the intended position.
7. After that, we grind the ends of the belt and iron the stitching seam.
8. In conclusion, we tack and sew the belt to the bodice. Overcast the seam.
9. It remains only to turn the bow and attach it to the stand untied so that it can be ironed after washing.