Pattern of a white jacket with an original collar

PDF pattern for printing on a printer or plotter in full size for jacket sizes from 40 to 52.

How to sew a jacket with your own hands using a ready-made pattern

Sizes: 40-52 - buyer receives ALL sizes

File format for download in order:

PDF in full size and without seam allowances.

After paying for the order, you will receive links to download two files patterns of a jacket of gradation of sizes from 40 to 52:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Sewing difficulty level: professional.

This style of jacket is suitable only for slim people.

The consumption of the "top" fabric is 150-180 cm with a width of 140 - 150 cm.

Lining consumption 90 - 100 cm.

Dublerin consumption 75 cm.

Ideal for sewing are loden, tweed and lightweight coat fabrics, as well as fabrics from the range of suits or thick dresses.

The set of jacket patterns includes (Fig. 1):

back patterns - middle, barrel 1 and barrel 2;

shelf patterns - middle, barrel 1 and barrel 2;

sleeve patterns - upper and lower halves and

collar pattern.

The lining is cut out according to the same patterns as the "top" of the product.

How to buy an electronic pattern

How to print a life size pattern at home on A4 sheets

How to choose a pattern size without taking measurements and using tables

Download free patterns of dresses and coats for children

Cut and sew a white Melanie jacket with your own hands

The execution of this model will require professional cutting and sewing skills from the tailor.

Those who want to “try”, who say “you have to start sometime”, should understand that such products are not sewn according to the description.

Without specific professional skills in sewing outerwear, the product can be damaged at any stage of processing.

Let's start by choosing the option of processing the jacket - with or without a lining.

For a product without lining, dubbing is performed only on the selection (Fig. 2), which in this case is the “barrel of the shelf 1” and the part “the middle of the shelf” is made one-piece to save time and improve the quality of processing.

The shared thread, if there is no designation on the pattern, is located, as in a classic jacket: for the upper half of the sleeve - parallel to the front seam, for the upper collar - along the midline.

The exception is the lower collar - not a single cut should fall on the lobar thread.

The lower half of the sleeve also does not refute the rules - share along the part, but "catching degrees" is not required. In addition, the lower half of the sleeve may have a horizontal seam. It is better to place the stitching seam as high as possible.

For a lined jacket, dubbing can be done in the same way as for an unlined jacket.

If you duplicate to the maximum, then the “barrel of the shelf 1” is completely duplicated, like the edge, the middle of the shelf - completely with a gap of 0,5 cm in dubbing along the line of the edge of the board. In other words, as in a product with a one-piece selection.

The remaining parts of the shelf and back are duplicated from the top to the waist and the bottom of the dubbing is cut out with large teeth.

In any case, dubbing is cut out without seam allowances.

Allowances are duplicated separately on the bottom of the sleeve and the bottom of the product. That is, as in the classics.

Sewing is also close to sewing a classic jacket, but 2 fittings are enough, since the shape of the border has already been determined.