Cutting and sewing technique

Vera Olkhovskaya

As a rule, the marking of pockets is carried out when cutting.

Mark up pocket "cutting barrels" not difficult (Fig. 1).

Measure along the cut of the waist of the PP from the side seam from 3-x - Up 6 cm, on the side of 15 to 20 см and connect these points with a straight line.

Vera Olkhovskaya

Once the pants are cut, start by checking for the following pieces and trimming the missing ones.

For dress pants, you should have the following:

Vera Olkhovskaya

The processing of men's trousers is a great challenge for beginners, amateur tailors and many paying tailors.

Outerwear tailors, on the other hand, consider men's trousers to be the easiest job.

In this group of articles you will find a complete description of the tailoring of trousers with one fitting.

How to calculate fabric consumption, how to cut a straight skirt step by step with your own hands, building the basis of a straight skirt for full and thin people?

You will find the answers to these questions in this tutorial on patternless cutting for beginners.

On fig. 1, 2 and 3 show the most common 3-thread overlock stitches with simultaneous edge trimming: overcast (fig. 1), knitted (Fig. 2) and hemming with a steering wheel (Fig. 3).

overcast or edge seam - used to process one free (open) cut of the part.

1. Why is the sleeve cut out after trying on?

Let me clarify: after trying on the sleeve should only be cut out in products that are sewn with two or three fittings.

At the first fitting, the position of the shoulder and side seams, as well as the total volume of the product, are specified.

After that, the length of the armhole becomes known, therefore, the task of making (or selecting) a pattern is simplified, taking into account the height or length of the armhole of the product.

Attention!

The measurement method described here may differ from the methods you are familiar with.

The couturier is not responsible for the fit of the product if the rules for taking measurements proposed below are violated and / or the rules and accuracy of cutting and sewing technology of the product are violated.