Pattern of a blouse on a round yoke with a one-piece sleeve

An electronic blouse pattern is printed out in full size on a home printer or plotter. Can be printed on sheets of paper from A4 to A0. Paperless cutting through the projector is possible.

In the photo, see the version of the blouse according to this pattern, which was sewn by the customer Elena Perebeinos:

"Size 50, the customer's height is 176. It was easy to sew. Instead of assembling, I made a fold and a curly cuff. The bottom of the cuff did not connect, but overlapped."

Free download Instructions on how to sew a blouse using this pattern

Pay and Download this blouse pattern

How to sew a do-it-yourself blouse on a round yoke with a one-piece sleeve using a simple pattern for beginners

Contents of the instruction:

1. Description of the format of blouse patterns on a round yoke with a one-piece sleeve.
2. What is included PDF blouse patterns and style design.
3. The choice and consumption of fabric for a blouse, how to buy, download and print a pattern.
4. How to cut a blouse on a yoke with a one-piece sleeve according to a simple ready-made pattern.
5. How to sew a blouse on a yoke at home - sewing sequence.

Buy and download this blouse pattern

1. Description of the format of blouse patterns on a round yoke with a one-piece sleeve

Sizes: 40-52 or 52-64. All blouse sizes from 40 to 52 or from 52 to 64 are printed from one PDF file of the pattern. That is, the buyer receives all sizes of the gradation chosen by him.

File Format: PDF full size and without seam allowances

After paying for the order, you will receive two links to download two files:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Pattern assembly diagram when printing on A4 sheets of a home printer

For sizes 40 to 52:

The pattern is assembled on one large page of patterns from 30 sheets of A4 paper - 5 rows of 6 sheets in a row.

For sizes 52 to 64:

The pattern is assembled on one large page of patterns from 35 sheets of A4 paper - 5 rows of 7 sheets in a row.

Sewing difficulty level: easy.

The pattern is suitable for all types of figures of various fullness - for full and for slender.

The pattern is designed for sewing at home on household sewing machines.

2. What is in the PDF set of blouse patterns and style design

2.1. A set of simple patterns for a blouse on a round yoke with a one-piece sleeve

(picture 1):

1. Back patterns - yoke and back.
2. Shelf patterns - yoke and shelf.
3. Collar pattern.

Patterns of cuffs and straps are not included in the set of patterns, as these are rectangles.

Below is how to cut cuffs and slats (figures 3 и 4).

2.2. Description of the design of the kimono blouse pattern on a round yoke

A simple enough blouse pattern to offer it for sewing to beginners learning to cut and sew.

One-piece sleeve - a variation of kimono. The bottom of the sleeve is suitable both for processing with cuffs and without them.

Round yoke and gathers, classic collar and cuffs.

Large volume blouse, oversized silhouette.

The blouse can be worn like a tunic.

If you need to adjust the length, a suitable area for this is between the level of the waist and the level of the rounding of the bottom (picture 2). Between these two points (levels) you need to lay a fold to reduce the length or make a cut and move apart to lengthen the blouse to wear it as a tunic or dress.

3. The choice and consumption of fabric for a blouse, how to buy, download and print a pattern

3.1. How to sew a blouse with a kimono sleeve on a round yoke

This style can only be sewn from thin and very thin fabrics.

Suitable as shirt chintz, and batiste or chiffon. Muslin, gauze, voile. From expensive fabrics, crepe de chine and other natural silks are suitable.

For a convenient economical layout, it is better to choose a fabric with a width of 150 cm. With this width, the consumption will be about 160 cm.

When calculating the consumption of expensive fabrics with a different width, you should perform a preliminary layout of the patterns with the already checked length of the product. If the width of the pattern is wider than the width of the fabric, the sleeve can be shortened or the pattern can be cut arbitrarily, as shown in 2 drawing.

3.2. Instructions on how to buy, how to print and others

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

Buy and download this blouse pattern

4. How to cut a blouse on a yoke with a one-piece sleeve according to a simple ready-made pattern

Opening is quite simple. It should be started after checking the length of the product and the length of the sleeve, as well as after correcting the length, if necessary (picture 2).

So, two cutting options are possible - with a bar (picture 3) and with a "one-piece bar" (picture 4).

4.1. Plank option (picture 3) suitable for all fabrics

Lath width in cutting = 3 cm finished width + 2 cm for seams.

Cut-out cuff width = finished width + 2 cm for seams.

The length of the cuff depends on your desire, it can be loose along the width of the sleeve with pleats or tight enough for the arm.

Cut-out cuff length = shoulder girth or sleeve bottom length + 2 cm for seams

Please note that it is better to cut the bar along a transverse or oblique thread. In this case, it is easier to process it “cleanly”. True, if you cut along the oblique, then the consumption will increase greatly, so we cut along the transverse.

4.2. Let's now consider how to cut a "one-piece bar" (picture 4)

This option is only suitable for double-sided fabrics.

To cut the side with such a “bar”, 4 cm are added to the edge of the side of the shelf. Of these, 3 cm per bar, 1 cm per hem.

Seam allowances in any version 1 cm, except for the neck. Allowances are not added to it. On board (picture 3) allowances protrude to the edge, so we do not cut the edge.

An important detail about cutting a blouse for custom tailoring at home:
collar and cuffs are recommended to be cut after fitting.

5. How to sew a blouse on a yoke at home - sewing sequence

1. We start with processing the sides.
   Plank, the cutting of which is shown in figure 3:
   - bent and ironed on one long side by 1 cm;
   - it is attached with the uncurved side to the board;
   - iron and iron on edge;
   - put the folded side on the face and adjust;
   - we give a finishing line.
   "One-piece plank" (picture 4):
   - make a double hem, tucking "bar" on the "face";
   - ironing;
   - it is better to do the finishing line after connecting with the coquette.
2. We continue by assembling along the line of the yoke and the pleat on the sleeve. Let me remind you that the assembly can be done with a “weak” machine stitch (large stitches, loose upper thread) or manually. Two gathering lines at a distance of 0,5 - 0,7 from the edge and with the same distance between them. We distribute the assembly along the back in a special way - more on the sleeves, less on the center. On the shelf - more on the sleeves and chest, very little near the bar. On the sleeves, you can “lay” folds or perform the same assembly as along the yoke line.
3. Stitch the yokes, overcast and iron the seams. If the bar is one-piece, lay the finishing lines.
4. Sew, overcast and iron the shoulder seams.
   They can also be processed double or sewing seam
5. The side seams can be sewn, trimmed and ironed. Processing for chiffon, voile and crepe de chine can be reduced to processing sections
   rolled seam (aka a seam with a rudder),
   but very fine tuning is important here so that the seam does not look rough or stretched. Chintz should be overcast on an overlock or edged. For gauze, you can use the Moscow seam and the same edging. Considering that today fabrics bearing the same name can be of completely different quality and properties, it is worthwhile to perform several samples before processing in order to choose the best method.
6. The bottom hem may not be required or it may be done "in an open hem" - one hem, one line.
7. A fitting for a blouse of such a large volume is hardly needed, but it is necessary to measure the length of the cuts of the neck and the bottom of the sleeves according to the product. After that, you can cut out the collar and cuffs.
8. Process the collar, process the cuffs.
9. Stitch the collar and sew the cuffs, process the sections.
10. Loops, buttons.
    See how to sew buttonholes on a typewriter on various types of fabric
11. Finishing ironing.

During the sewing process, the question may arise, is it necessary to duplicate the placket, collar and cuffs?

It is not worth duplicating on thin fabrics. Shirt chintz - “holds” the sides quite well, and dubbing is visible on chiffon.
In some cases, it is possible to strengthen the bar with a thin stretch doubler, which is used for dubbing products made of stretch fabrics.

But the decision should be made after making a trial sample of the bead (on a small piece of fabric).