Patterns of an elegant two-tone jumpsuit with pockets

Electronic patterns for life-size printing on a home printer or large-format plotter.
For printing on sheets of paper from A4 to A0.

In the photo there is a version of the jumpsuit sewn by the customer Nasiba Salimova according to this pattern.

Free download instructions on how to sew this jumpsuit

Buy and download this jumpsuit pattern...

How to sew a women's elegant overalls according to a full-size pattern with your own hands

Contents of the instruction:

1. Description PDF of the pattern and what is included in the overalls patterns.
2. Description of the design and style, from which to sew overalls.
3. How to cut an elegant jumpsuit for a woman according to a finished pattern.
4. How to sew a jumpsuit with your own hands step by step.

Buy and download this jumpsuit pattern

1. Description of the PDF of the pattern and what is included in the overalls patterns

1.1. Pattern description:

Sizes: 40-52 and 52-64.

File format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files patterns of an elegant two-color jumpsuit with pockets for women from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

1.2. Assembly diagram of the pattern when printing on a home printer, A4 sheets

When printing an A4 file, overalls patterns are assembled:

1. For sizes 40 to 52, the pattern is assembled on two large pages of patterns from 70 A4 sheets:
   35 sheets per large page - 5 rows of 7 sheets per row for each.
2. For overall sizes from 52 to 64, the pattern is assembled on three large pages of patterns from 94 sheets of A4 paper:
   1 and 2 pages of patterns - 35 A4 sheets, 5 rows of 7 sheets in a row.
   3 page - 24 A4 sheets, 4 rows of 6 sheets in a row.

The sewing level is professional.

The style is suitable for both full and slender figures.

Pattern is for home use only.

1.3. Complete set of patterns for women's elegant overalls with two-tone pockets

(picture 1)

1. Patterns of the back and shelves (bodice). The large size shelf pattern has a side tuck for the chest.
2. Trouser pattern - PP and ZP.
3. Patterns of flying parts for the right PP and for the left PP.
4. Patterns of pocket details - burlap-valance and burlap-turning.
5. Sleeve patterns: with or without a fit. On the patterns of the sleeves, there are markings for the length 3/4 and for the short sleeve.

The belt pattern is not included, as the belt is a strip of fabric.

2. Description of the design and style, from which to sew a jumpsuit

2.1. Description of the design of an elegant jumpsuit with two-tone pockets

The jumpsuit is detachable at the waist, which makes it easy to adjust the bodice for various features of the figure and height, guaranteeing an impeccable fit.

A cut-off barrel pocket with a rounded pocket entry line.

The shelf, as well as the flying parts, have a smell. The shelf of the big sizes has a lateral tuck for a breast.

The set includes two sleeves.

2.2. What to sew an elegant two-tone jumpsuit with pockets from and how much fabric is needed

The fabric should be thin enough, as the layering of the product will make the seam at the waist thick enough.

Thin, but dense silk or thin knitwear with little stretch are the best options. For a casual summer option, you can use a thin natural staple.

The consumption of dark fabric will be from 270 to 320 cm.

Red fabric consumption - up to 120 cm.

This is with a width of 140 - 150 cm.

2.3. Instructions on how to buy, how to print and others

How to choose a size without using tables and taking measurements

How tall are the patterns...

How to buy a ready-made electronic pattern ...

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing ...

Simple patterns dresses, sweatshirts, skirts and pants in full size free download.

Buy and download this jumpsuit pattern

3. How to cut an elegant jumpsuit for a woman according to a finished pattern

As usual, we start by checking the measurements of the length of the trousers, the length of the back, the length of the front and the length of the sleeve with patterns.

After completing the correction of the length of the patterns, you can start cutting.

Since this model of overalls has two asymmetrical details, we will cut from the “dark” fabric by laying the fabric in one layer with the wrong side up (picture 2).

Please note that the jumpsuit can be cut with or without pockets. For cutting with pockets, you can immediately cut off the “barrel” of PP along the line of entry into the pocket, as shown in picture 2.

Seam allowances 1 cm. Exceptions: on the bottom of the trousers - 2 - 3 cm; at the waist of the trousers, along the armholes and the sprout (neck of the back) allowances are NOT added; along the cut of the entrance to the pocket - 0,5-0,7 cm.

Separately, it should be said about the allowance for the selection of shelves. Its width is 5 - 6 cm. When cutting, it is convenient to attach a strip of duberin of the required width to the shelf pattern.

The allowance along the bottom of the bodice deserves special attention - we add 3 - 4 cm. This allowance is needed only in order to easily and perform a high-quality fitting of the bodice, taking into account the features of the figure and posture. After fitting it can be cut.

Fragments of the belt with a width of 5 - 6 cm are placed along the share thread. It is better if the belt does not stretch, as the stitching may burst when it is stretched.

Having completed the cutting, do not forget about the notches and markings of the semi-skid (the middle line of the product and the body), which will need to be combined during the sewing process.

Cutting red parts is not difficult (picture 3).

4. How to sew a jumpsuit with your own hands step by step

I'll start with some important points:

1. The selection of the shelf - one-piece should be duplicated with a thin doubler, swept over and folded. Sweep it with large, up to 7-8 cm, oblique stitches. Do not try to iron it hard, there should not be a “rib”. Soft hem with an open cut - overcast and fold once. It will be enough to fasten at the waist and in the shoulder seam.
2. Small folds on the PP and flying parts (an alternative to tucks) should “look” in different directions. On the PP - to the bow, on the flying parts - to the side seam. This will reduce swelling.
3. Ironing is performed AFTER EACH OPERATION.
4. Lightning - in the middle seam of the back-seat. The end of the zipper is not below the hip line. At the same time, it is not necessary to make a lightning from the top, that is, from a sprout. It will be more convenient if it starts from the level of the shoulder blades. In this case, the sprout can be processed with an oblique inlay.

Now the sewing sequence.

1. Assemble the bodice. Sweep the zipper, sweep the shelf along the half-skid.
2. Gather trousers with flyaway details. Assembly sequence: darts; sweep; sides of flying parts, not reaching the bottom; bow; connect the PP and flyaway parts in the pocket area temporarily and process the pockets; side seams; on the waist of the PP and flying parts (half-skid and bow must match); step seams; seat to zipper; baste a zipper for fitting.
3. Try on the bodice: put on; tie with a linen elastic band; outline the waist line according to the figure; outline the armholes according to the figure; try on a sleeve; cut armholes to fit; put on and outline three points of joining armholes and sleeves; sweep in points (for a sleeve with a fit). For a sleeve without a fit, cutting the armhole is also worth it, you can also mark the points, the seam of the sleeve and the side seam should NOT be combined.
4. Connect the bodice and trousers. On the allowances, stitch with a rubber thread so that the seam is exactly at the waist. In this case, the belt will not ride on the figure.
5. Process the bottom. Process the belt.