Pattern of boho slimming trousers

Instructions for patterns of boho slimming trousers.

Large and small sizes. Cutting and sewing at home

Contents of the instruction:

1. Description of patterns.
2. What patterns are included in the set of patterns for slimming boho trousers.
3. Description of the design of the style of trousers slimming in the style of boho.
4. What fabric to sew boho pants for summer and winter, how much fabric is needed for large and small sizes.
5. How to buy and download ready-made patterns of boho slimming trousers with a printout on a home printer or plotter.
6. How to cut boho slimming trousers in large and small sizes according to ready-made patterns. How to adjust the length on the pattern.
7. How to sew boho pants at home - sewing sequence.

Buy and download this pattern

1. Description of the pattern

Sizes: 40-52 and 52-64.

File format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files patterns of trousers in boho style slimming and with reliefs from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

The difficulty level of sewing is simple, but you will need some cutting and sewing skills. Do not use as a first product.

The style is suitable for all types of figures of various fullness and height.

Pattern is for home use only.

2. Complete set of patterns for slimming boho trousers

(picture 1)

1. Pattern PP (Front half).
2. Pattern ZP (Back half).
3. Pattern of Valance.
4. Pattern Turning PP and Turning RFP.
5. Burlap pattern for processing a pocket in relief.
6. Invoice pocket for RFP.

The belt is not included as it is a rectangular strip of fabric. See explanation below.

3. Description of the design of the pattern of boho slimming trousers

The style is quite concise in its design and does not have any difficulties in processing.

The Valance Detail can be cut out from both the companion fabric and the same fabric as the trousers.

The PP pockets are located in the relief line separating the PP and the Valance, so one of the burlaps is combined with the Valance.

The bottom of the trousers can be finished with a cuff (the cuff area is shaded and can be folded or cut off if necessary) or simply with darts.

Waist darts can be ignored if the trousers are sewn with an elastic band. If the trousers are made with a stable duplicated belt without elastic bands and with a fastener, then it is advisable to make darts at the waist.

4. What to sew boho pants for summer and winter

Traditional linen and muslin are good for summer trousers.

Denim is fine too. Of course, for summer we choose thinner, for winter - thicker.

You should take a closer look at knitted fabrics that imitate hand knitting. They might work well for the Overwatch.

The consumption of the main fabric will be from 120 to 235 cm with a width of 150 cm. Roughly speaking, from one length to two lengths, when the length is considered with allowances for hem and processing.

In any case, the consumption of the companion fabric will be one length of the part, that is, up to 100 cm. More precisely, we need a rectangle 95 by 45 cm.

5. Instructions on how to buy, how to print and others

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a pattern ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

6. How to cut these slimming boho trousers according to the finished pattern

After choosing the size, we decide whether to shorten or lengthen the pattern. To do this, measure the length of your favorite trousers without a belt on the side to the bottom or measure the length on the side of the figure. Compare the measurement with the length of the pattern. Then we cut the pattern horizontally in the correction area and move it apart by the required amount or lay a fold on the pattern in the correction area.

We start by choosing a variation: with a cuff or just with darts.

If we choose cuffs, cut off the shaded area at the bottom of the trousers and get ready to cut a rectangular cuff with a width:

Two finished widths + 2 cm

Cuff length = Sewing cuff length + 2 cm

About allowances for processing when cutting (picture 2).

We add along the side stepper - 1 cm.

On the bow - if you do not need a trouser-type fastener - 1 cm, if you need a fastener, then up from the level of the hips - 3 - 3,5 cm.

On the seat - 1 cm, but you can make a margin, especially if there is a tendency to increase weight. For a reserve, we expand the allowance for the waist to 3 - 3,5 cm.

On the bottom - depending on the chosen processing method, up to 3 cm.

Allowances for the pocket on the RFP: 1 cm on the sides and 2,5 at the entrance to the pocket.

We DO NOT add allowances for the waist and other cuts.

The layout is shown in fig. 2 and actually repeats the layout of other trousers.

As for the facing, it is also cut out without seam allowances and may consist of fragments if there is not enough fabric.

The facing can be duplicated if necessary, but you can do without dubbing.

Open the belts.

Belt width in cutting = Two widths in finished form + 2 cm.

The length of the belt in the cutting depends on which belt you want to sew.

For an elasticated belt, the length of the belt = the length of all sections of the waist + 2 cm. It is better to measure the sections of the waist already by the trousers, when they are ready and only the belt remains.

To simplify, we can say that

The length of the trouser belt blank with an elastic band \u3d Hip circumference + 5-XNUMX cm and no less!

For a belt with a clasp = Half waist + 10 cm. There should be two blanks.

Loops - width 3 cm.

After cutting, do not forget to mark the side line on the valance and make notches along the hips and knee on all parts. These control marks will be very helpful when assembling the product.

How to sew

1. Darts at the waist, if provided, darts at the bottom.
2. ZP pocket. How to handle patch pockets sewing video
3. Clasp, if provided. How to process a fastener - in drawings and diagrams И video how to process a simplified version of a trouser fastener with a zipper
4. Side seams.
5. Stitch the burlap of the pocket and turn the notch along the PP and RF.
6. Stitch the vision.
7. Step seams.
8. Seat seam. How to properly process the seam of the seat so that it does not tear
9. Loops, belt. How to sew belt loops and a belt without elastic, how to try on
10. Bottom.