Straight skirt pattern with pockets and flounces

Instructions for patterns of a straight skirt with pockets and flounces.

Small and large sizes. Cut and sew at home.

Contents of the instruction:

1. Description of patterns.
2. What patterns are included in the set of patterns for a straight skirt with pockets and a flounce.
3. Description of the design of the pencil skirt with frill and pockets.
4. From what fabric to sew a straight skirt with a frill for summer and winter and what expense.
5. How to buy and download ready-made patterns of a straight skirt with pockets and a frill with a printout on a home printer or plotter.
6. How to cut a skirt with a frill in large and small sizes according to ready-made patterns.
7. How to sew a skirt with pockets and a frill with your own hands - sewing sequence.

Buy and download this pattern

1. Description of patterns

Patterns of a straight skirt with pockets and a flounce

Sizes: 40-52 and 52-64.

File format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files straight skirts with pockets and flounces from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

The level of difficulty of sewing is simple - the initial skills of cutting and sewing will be enough.

The style is suitable for full and thin, but a good fit will be difficult to achieve on figures with a strongly protruding belly and / or buttocks.

Pattern is for home use only.

2. What patterns are included in the set of patterns for a straight skirt with pockets and a flounce

(picture 1)

1. Patterns PP (Front Half) - PP right and PP left.
2. Pattern ZP (Back Half).
3. Flounce pattern.
4. Pattern of details of a pocket of the "cut-off barrel" type - Burlap-valance and Burlap-turning.

The belt pattern is not included, as the belt is a strip of fabric, a rectangle. See below for how to cut.

3. Description of the design of the pencil skirt with frill and pockets.

The asymmetrical cut of a straight skirt will not complicate cutting and sewing too much. In fact, this is a simple pencil skirt with the addition of one element - a flounce.

Capacious and very simple pockets of the "barrel cutting" type have a straight line of entry.

If necessary, the skirt can be easily narrowed down from the hip line, as well as lengthen or shorten.

People often ask why the skirt has double darts. The answer is to make it easier to adjust the fit. Equally important is the middle seam. It is simply necessary for some types of figures. It is easy to try on along the middle seam and you can make a slot for easier walking.

4. From what fabric to sew a straight skirt with a frill for summer and winter and what is the expense.

For this skirt, thin suiting fabrics are the best solution. A strip or a cage will well emphasize the originality and conciseness of the style.

For winter, the fabric can be a little thicker and the "lining" of the frill can be cut out of a thin contrasting fabric.

Consumption with a width of 150 cm will be 95 cm or 140 cm. In other words, one length plus pocket details or two lengths plus a hem.

5. How to buy and download ready-made patterns of a straight skirt with pockets and a frill with a printout on a home printer or plotter.

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a pattern ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

6. How to cut a skirt with a frill in large and small sizes according to ready-made patterns.

Before opening, we check the length of the pattern and, if necessary, adjust it.

Seam allowances - 1 cm. The exception is the waist, we do not add allowances at the waist. And on the bottom 2,5 - 3 cm.

We cut the fabric in one layer face up. The details of the PP are laid with the inscriptions up. With this approach, errors in cutting are excluded.

The layout for relatively small sizes is shown in Fig. 2. Details of the skirt and frill, as they say, "passed in the same length."

As mentioned above, the belt is a strip of fabric.

Belt width in cutting = 2 widths in finished form + 2 cm.

Belt length in cutting = Waist circumference + 10 cm for seams and transition part.

The belt in the cut can consist of two parts, if one part is insufficient in length. The cutting of such an attachment is shown in Fig. 2-3.

As for cutting conditionally large sizes (Fig. 3), the difference is only in the placement on the fabric of the double RFP.

Separately, it is worth mentioning the cutting of pocket details.

The burlap-valance is cut out with the combination of the PP pattern, and the burlap-turning with the share along the line of entry into the pocket. In this case, it will even be possible to abandon the doubler dolevik and the pocket will not stretch in the sock.

After cutting, make notches along the hip line.

7. How to sew a skirt with pockets and a frill with your own hands - sewing sequence.

1. To make a shuttlecock - turn the flying edge. Be sure to sweep and iron.
2. Stitch the finished shuttlecock to the right PP and stitch the right PP from the left, aligning the hip lines. Iron and overcast the seam.
3. Treat pockets: stitch burlap-turning; turn over and iron; perform a finishing line; The burlap-valance is placed under the pocket, basted, fastened with bartacks along the edges of the entry line, and only then it is ground down and overcast. Don't forget to iron the finished pockets.
4. Sweep up the side seams and the middle seam and press lightly. At the same time, the middle seam is not completely swept away - we leave up to 15 cm for the zipper. The zipper can also be swept. Please note that some machines have special stitches for basting products. You can use.
5. Fitting. We refine the landing and make adjustments.
6. Sew, overcast and iron vertical seams.
7. Belt
8. Bottom and finish ironing.