Attention! This model will require professional skills and high fur consumption.
Before buying fur, make patterns with the length of the product you need.
And, if you do not have enough experience in working with fur, make duplicates of paired patterns and be sure to sign the sides of the patterns - “face” and “wrong side”.
In this article, we will look at cutting this model of a faux fur coat.
Ready-made pattern of such a fur coat
Ready electronic patterns of a fur coat with a hood "cobra"
Open fur coats with your own hands
Having made patterns, perform a preliminary layout, taking into account the direction of the fur and its width.
Let me remind you that ALL details of the "top" of the fur coat (short coat) must have the same pile direction, and the paired details must strictly mirror the pattern.
Faux fur when cutting, DO NOT fold in half and cut out the details with scissors, DO NOT cut the fur.
Attention! We cut only the base of the fur, for this we start the scissors shallowly, DO NOT touch the pile!
The set of patterns for this model of a fur coat / short fur coat includes: a shelf with a one-piece selection and a hood, a back, the middle part of the hood and two halves of the sleeve (picture 1).
For cutting, in addition to these patterns, according to the pattern of the shelf, we need to make patterns for the inside of the hood (picture 2).
Here you need to immediately consider which version of the execution of this very inner part of the hood you need.
Options for a hood for a fur coat when cutting
First: the inner part is completely made of "top" or finishing fur, as in the photo.
Hood WITHOUT a lapel in the upper part (figure 2 a).
The middle part of the hood is unchanged. But, if the hood is supposed to be worn only as a collar in its size, the fit should also be laid (picture 3).
Second: the inside of the hood consists of fur and lining, without a lapel in the upper part (figure 2 b).
In this case, the length of the edge fragment should be specified in place, since in this case the hood should fit.
In other words, the edge fragment should be 1-1,5 cm shorter than the hood.
It is easier to customize the finished part when the top hood (one-piece with a shelf) is assembled.
The middle part of the hood is shortened by the width of the edge.
The third: hood with a lapel at the top.
It is better to cut in two parts (figure 2 b), regardless of whether the “lining” of the hood is made of fur or only with an edge.
In this case, the edge should fit, for which an additional fit allowance should be added, but it should also be specified locally.
The detail of the middle part is also shortened by the width of the edge.
After the choice is made and the patterns are made, you can proceed to the layout.
Layout for cutting a fur coat
Next, the simplest option is disassembled - with a one-piece hood.
The fur layout is shown in picture 3.
Pay attention to the location of the details of the inner part of the hood - it is in this position that the fur will effectively frame the face.
The fit is added to the cut of the edge of the hood, of course, in addition to the main allowance for turning.
Crosses and scissors indicate the corners, the allowances in which should be cut exactly at the corner vertices.
The rest of the allowances are common. Just in case, let's go through them.
Add 4 - 4,5 cm along the bottom of the product and the bottom of the sleeves.
Side, shoulder, stitching seams of sleeve halves, tuck, hood - 1 cm each.
The only exception is the cut of the edge of the inner hood - it will be 2,5 - 3 cm, since we add a fit to it so that the inner hood can freely wrap the cut of the upper one.
Sprout, armholes and sleeves - for the line of stroke patterns.
Cutting the lining will not be difficult, but for the manufacture of the shelf pattern, we will use the pattern of the same name (picture 4).
We bend the one-piece selection towards the shelf and draw a line along its edge.
On the side of the side seam, we make a slight narrowing (2 - 4 cm), the same narrowing should be done along the back.
Attention! If the lining is non-flying, it is not necessary to narrow it.
The layout of the lining is “jack”, the sleeves can be cut across and even with additional stitches if you want to save a few centimeters (picture 5).
Seam allowances are normal.
On the bottom 4 - 6 cm, on the bottom of the sleeves 3 - 4 cm.
Armholes, sprout, okat - for the stroke line.
The remaining seams are 1 cm.
The batting is cut according to the details of the lining.
Back and shelf 3/4 length.
If you cut out batting for the entire length of the product for a fur coat, it will be too cumbersome.
Ready-made patterns of women's fur coats and coats
Join my community on Viber...
