Pattern dress case slimming combined

Instructions for patterns of a dress of a slimming combined case - cutting and sewing with your own hands

Contents of the instruction:

1. Description of dress patterns - slimming combined case.
2. What patterns are included in the set of patterns.
3. Description of the style of dress patterns - sheath.
4. What to sew a sheath dress from and what fabric consumption.
5. How to buy and download ready-made patterns of a dress - sheath.
6. How to cut a sheath dress according to a ready-made sewing pattern.
7. How to sew a sheath dress.

Buy and download this dress pattern

1. Description of dress patterns - a slimming combined case

Sizes: 40-52 and 52-64 - the buyer receives all sizes of the selected gradation.

File Format: PDF full size and without seam allowances

After paying for the order, you will receive links to download two files dress patterns - sheath, slimming from 40 to 52 or from 52 to 64 sizes:

1. PDF file A4, adapted for printing patterns on sheets of A4 paper in any program on any device, including mobile phones.
2. Multi-format PDF file for printing on sheets of any size from A0 to A4 on a printer or plotter using Adobe Reader.

Level of sewing difficulty: from simple to professional, depending on the chosen finish.

The pattern is suitable for conditionally proportional figures of various widths and is intended for sewing at home on household sewing machines.

2. What patterns are included in the set of patterns

(picture 1):

1. Back pattern.
2. Shelf pattern.
3. Barrel pattern.
4. Sleeve pattern, narrowed to the bottom with relief markings for combined products.
5. Turn-down collar pattern.
6. Pocket patterns: Burlap - for a pocket in relief and a patch pocket.

Patterns for facing the neckline (if any are needed for finishing) are not included in the kit, since the facings are cut out according to the patterns of the shelf and back.

3. Description of the style of dress patterns - sheath

This dress has an almost straight silhouette - the curves of the cuts in the waist area are as minimal as possible, like narrowing to the bottom along the side seam.

The relief of the shelf is located close enough to the side seam, which visually slims the figure.

The presence of a tuck for the chest on the middle part of the shelf allows you to sew this style from an absolutely stable (inelastic) fabric.

The relief is marked on the sleeve for cutting the combined sleeve. In addition, the pattern can be cut along this line to save money or if there is not enough fabric.

4. What to sew a sheath dress from and how much fabric is consumed

П

any fabrics of the dress range with sufficient density and thickness for the case will do.

Suitable for both dress wool and denim. Both plaid and printed fabric are suitable.

For a summer dress, you can use linen and cotton fabrics, as well as thick silk.

For sewing this model, it is desirable to use companion fabrics.

And there are options when fabrics will have different properties.

For example, a stable fabric for the sleeves and the middle part of the front, plus a dark stretch of low or medium stretch for the side part.

Some of the possible combinations and separates are shown in the photo.

The total consumption for a sheath dress with a long sleeve will be from 180 cm to 230 cm with a width of 140 - 150 cm.

A more accurate determination of the flow rate is possible only after an accurate determination of the length of the parts and the preliminary layout of the patterns.

5. How to buy and download ready-made patterns for a sheath dress

How to choose a size without using tables and taking measurements

What height are the patterns for?

How to buy a pattern ready-made electronic pattern

How to print a pattern at home in full size on A4 sheets or on sheets of any other size

How to assemble a pattern after printing

Simple patterns for dresses, sweatshirts, skirts and trousers in full size Free

Buy and download this dress pattern

6. How to cut a sheath dress according to a ready-made sewing pattern

Having chosen the style option, size and length of the sleeve, you can start cutting (figure 2 и  3).

The main point is to fold the fabric along the width of the laid out parts of the dress.

On fig. 2 shows one of the options for cutting a plain dress with a collar.

On fig. 3 - combined dress trimmed with companion fabric. Please note that in the layout on the left, the fabric is folded in half along the width of the front and back.

The fabric folding pattern is shown in the bubble.

Seam allowances - 1 - 1,2 cm. No allowances are added along the neckline, armholes and hem. On the bottom - 2,5 - 3 cm.

The facings for the neckline are cut out along the middle parts of the front and back from dublerin without seam allowances (Fig. 2). The width of the facings is 2,5 - 4 cm.

For the subsequent convenience of assembling the dress, immediately after cutting, make notches at the waist on all the details of the case and a notch above the highest point of the hem, which is marked on the drawing. Notches are also placed against the lines of the tucks and along the half-slip.

The half-skid (the middle line of the middle of the shelf) should also be marked with a thread so that it is preserved until the product is ready.

Dubbing blanks are glued onto the remnants of the fabric and then cut out with seam allowances at the place where the fragments are sewn, that is, along the shoulder sections and, if there are middle seams, then along the middle seam. The width of the seam allowance is 1 cm.

7. How to sew a sheath dress

1. We collect the back - a zipper in the middle seam. Assembly for fitting involves sewing with a “basting” line or basting, as well as ironing or ironing each seam.
2. We collect the shelf, side and shoulder seams.
3. We collect the sleeve and proceed to the fitting, which can be divided into two stages or make two separate fittings - as you wish.
4. Trying on the first stage (or the first fitting): we adjust the fit and degree of fit of the dress; if necessary, adjust the armhole and, placing shoulder pads (if required), mark three points of connection of the sleeve with the armhole. The first connection point is already there - this is the highest point of the eye and the point of the shoulder seam. It remains to outline the points of the front and elbow rolls, so that there are no creases on the sleeve.
5. Sweep the sleeve at the marked points and try on again.
6. Trying on the second stage (or second fitting): we clarify the correctness of the knitting of the sleeve, the shape of the neckline, which, if desired, we correct, observing symmetry. Adjust the length if necessary.
7. We grind, weave and iron or iron the seams of the shelf, we process pockets; then, the seams of the back, side and shoulder, we sew the sleeve. That is, we repeat the assembly of the dress in almost the same sequence as at the initial stage using a straight line (which you use for sewing) and overcasting stitches. Of course, if finishing is provided, then it must be done before processing the corresponding seams.
8. The bottom is processed into a hem with an open cut - overcast and fold once, then iron.